Brother International HL-720 Quick Setup Guide - English - Page 13

English: HL-YL Quick Setup Guide, Body Installing the Remote Printer Console Before you install the program, make sure that you have the following hardware and software: DOS Monitor Option Version 3.3 or later EGA/VGA or compatible Mouse; the mouse driver must be installed. (You can also operate the program with the keyboard.) Follow these steps to install the remote printer console program: 1. Make sure your printer is connected to your computer and is ready (On-line). 2. Start your computer. If you are in Windows, exit and return to the DOS prompt. You must be in the DOS prompt to proceed with installation. 3. Insert the supplied disk into your floppy disk drive (A: or B:). 4. Select drive A or B to be used by typing A: or B: after the DOS prompt and pressing the Enter key. C:\>A: 5. Type RPCSETUP and press the Enter key. A:\>RPCSETUP 6. Follow the instructions on the screen. Using the Remote Printer Console Main Program Type C:\RPCX>RPCX and press the Enter key to start the Remote Printer Console main program. The Main Screen will appear on your computer screen as shown on the right. Direct_Access Remote Printer Console Printer_Setup Console_Config Current Status Guide Status Ready Paper feed Sheet Feeder Emulation Paper Size Orientation Auto Letter Portrait Quality Copies Normal 1 Memory size 524288 Byte Select [Enter] Setting [Alt+Character] Menu [F1] Help [ESC] Exit The RPC gets the current settings information from your printer when it starts if bi- directional communication is enabled between your computer and printer. Otherwise, RPC shows its default settings. If you want to change settings, move the cursor to the desired item and select the desired setting by using the Enter and Cursor keys. Then, press the Enter key to make the selected setting valid. If you use a mouse, click the desired item to change the setting. 12