Brother International HL-730DX Quick Setup Guide - English - Page 9
Printing a Test Sample Action 6-3: Prepare DOS for the Printer Only for HL-730 series Users - software
View all Brother International HL-730DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English: HL-YL Quick Setup Guide, Body Printing a Test Sample Page We recommend that you print a test page. Refer to the instructions below. NOTE • The following test sample page operation will be invalid after the printer receives any data from your computer. • The test sample page can be printed by using the "Test Print Mode" procedure in Chapter 3 of the User's Guide. Press the control panel switch. The printer will start printing a test sample page. NOTE The HL-730 series printer can also print settings, fonts, and hexadecimal values of received data. For more information, see "Test Print Mode" in Chapter 3 of the User's Guide. NOTE If the printer does not print a test sample page, see "CHAPTER 6 TROUBLESHOOTING, Q & A" of the User's Guide. If you are still unable to print a test sample page after reviewing the information in the User's Guide, consult your dealer. After printing the test sample page, you are ready to prepare your computer to work with the printer. The software setup varies depending upon your computer and operating system. Refer to the relevant following section: Action 6-1: Prepare Windows 95 for the Printer Action 6-2: Prepare Windows 3.1 for the Printer Action 6-3: Prepare DOS for the Printer (Only for HL-730 series Users) Action 6-4: Prepare Macintosh for the Printer (Only for HL-730 series Users) 8