Brother International HL-L2325DW Quick Setup Guide - Page 1

HL-L2370DWXL / HL-L2370DW / HL-L2350DW / HL-L2325DW Quick Setup Guide Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure. Not all models are available in all countries. The latest manuals are available at the Brother Solutions Center: support.brother.com/manuals. D01U2C001-00 USA/CAN Version B Unpack the machine and check the components Drum Unit and Toner Cartridge Toner Cartridge Replacement (For HL-L2370DWXL model) Use the toner cartridge that is pre-installed in the drum unit first. Watch our Video FAQs for help with setting up your Brother machine: support.brother.com/videos. Brother Installation Disc Quick Setup Guide Reference Guide (only for certain models) Product Safety Guide NOTE: • Manuals in Spanish for this model are available on the Brother Solutions Center. (USA only): support.brother.com/manuals Los manuales en español de este modelo están disponibles en el Brother Solutions Center. (Solamente en los Estados Unidos): support.brother.com/manuals • The components included in the box may differ depending on your country. • The available connection interfaces vary depending on the model. • Interface cables are not included. You must purchase the correct interface cable if you require one. USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long. Network cable Use a straight-through Category 5 (or greater) twisted-pair cable. • The illustrations in this Quick Setup Guide show the HL-L2370DW. • This machine's Reference Guide is either printed for you or is available on the Brother Installation Disc included in the carton. 1 Remove the packing materials and install the drum unit and toner cartridge assembly 1 2 1 Remove the orange part. Push firmly. 2 Load paper in the paper tray Adjust the paper guides. Do not exceed this mark. 3 Connect the power cord and turn on the machine Back Front 4 Select your language (if needed) 1. Press ▼ or ▲ to select [Initial Setup], and then press OK. 2. Press OK to select [Local Language]. 3. Press ▼ or ▲ to select your language, and then press OK.