Brother International HL-L2325DW Command Reference Guide for Software Develope - Page 219
Kernel Commands
View all Brother International HL-L2325DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
4. KERNEL COMMANDS 4.1. Introduction This section explains three PJL command, UEL, ENTER and COMMENT. These commands provide the minimum set of tools to operate job control. UEL command (Universal Exit Command) ENTER command COMMENT command 4.2. UEL Command The Universal Exit Command causes the printer to exit the current printer language and sets the printer into PJL mode. Syntax %-12345X The UEL command is a data stream sequence. The UEL command indicates to the current printer language to finish a job. If PJL is available, PJL commands which have not yet been executed are cancelled and the printer is ready to accept the next PJL command. The UEL command must be placed in the first and last position of all PJL job command sequences. Printers which have an Automatic I/O switching feature can use the UEL command in order to set job boundaries. The @PJL prefix which is placed at the beginning of a PJL job must follow immediately after the UEL command . If the printer receives codes other than the PJL prefix, it enables the default printer language and prints the job. ENTER command should be used in order to specify the printer language. Example %-12345X@PJL @PJL ENTER LANGUAGE = PCL E.......PCL JOB........E %-12345X 4.3. EXECUTE Command The EXECUTE command orders the printer to execute the specified operation. This command is supported only by HL-1050/1070/1250/1270N/1450/1470N/P2500/2400C/2400Ce/ 3400CN/1650/1670N/3260N/2460/7050/1850/1870N/5040/5050/5070N/5140/5150D/5170DN/2600CN/345 0CN/6050/6050D/ 6050DN/8050N/2700CN/2070N/5240/5250DN/5270DN/5280DW/4040CN/4050CDN /4070CDW/2140/2150N/2170W/5340D/5350DN/5370DW/5380DN/3040CN/3045CN/3070CW/3075CW/2 130/2240D/2250DN/2270DW/4140CN/4150CDN/4570CDW/5440D/5450DN/5470DW/6180DW/S7000D N/3140CW/3150CDW/3150CDN/3170CDW/1110/1111/1112/1118/L8250CDN/L8350CDW(T)/L9200CD W(T)/L9300CDW(T)/ L8260CDN/L8260CDW/L8360CDW(T)/L9310CDW/ L2300/L2300D/L2320D/L2321D/2260/2260D/L2305W/L2340DW/L2360DN/L2361DN/2560DN/L2360D W/L2365DW/L2366DW/2569DW/1212W/1210W/1210WR/1212WR/1210WE/1211W/1218W/1200/1201/ 1202/1208 /L3270CDW/3190CDW/L3230CDW/3160CDW/L3230CDW/L3230CDN/L3210CW printers. Syntax @PJL EXECUTE operation [] Parameters operation SHUTDOWN : DEMOPAGE : RESIFONT : PERMFONT: PRTCONFIG: The printer goes into sleep mode. The printer prints the demo page. The printer prints the list of resident fonts. The printer prints the list of permanent download fonts. The printer prints the list of printer settings. CHAPTER 5 PJL - 10