Brother International HL-L2340DW Command Reference Guide for Software Develope - Page 334
Underline mode, Continuous overline mode, Select double-height / double-width mode, Select character
View all Brother International HL-L2340DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 334 highlights
Underline mode Esc-n (27)(126)n n This command turns character underlining on or off. If n is set to 1 subsequent text is underlined. Horizontal tab spaces are not underlined irrespective of whether underlining mode is on or off. If n is set to 0 subsequent text is not underlined. LPRINT CHR$(27); CHR$(45); CHR$(1); 'Underline following text Continuous overline mode Esc_n (27)(95))n n This command turns character overline printing on or off. If n is set to 1 subsequent text is printed with a continuous line above it. Horizontal tab spaces are not printed overlined irrespective of whether overline printing mode is on or off. If n is set to 0 subsequent text is not printed with an overline. LPRINT CHR$(27); CHR$(95); CHR$(1); 'Print following text with an overline Select double-height / double-width mode Esc[@n1n2n3n4n5n6 (27)(91)(64)n1n2n3n4n5n6 n1n2n3n4n5n6 This command enables you to select single or double line spacing and single or double character height and width. n1 should be set to 4 and n2,n3 and n4 to 0. To set double line spacing and select double-height characters set n5 to 34. To set double line spacing and select normal height characters set to n5 to 33. To set single line spacing and select double-height characters set to n5 to 18. To set single line spacing and select normal height characters set n5 to 17. To select double-width characters set n6 to 2. To select single-width characters set n6 to 1. LPRINT CHR$(27); CHR$(91); CHR$(64); CHR$(4); CHR$(0); CHR$(0); CHR$(0); CHR$(34); CHR$(1); 'Set double line spacing and print doubleheight, double-width characters. Select character from the All Character Code table Esc\n1n2 (27)(92)n1n2 n1n2 This command enables you to print characters from the All Character Code table. n1 and n2 specify the number of characters to be printed. The number of characters printed is 256*n2+n1. Control codes included in the character data are not executed. LPRINT CHR$(27); CHR$(92); CHR$(64); CHR$(1); CHR$(65); CHR$(66); CHR$(67); CHR$(68); CHR$(69); 'Print 320 characters starting ABCDE... CHAPTER 7 IBM PROPRINTER - 16