Brother International HL-L2370DWXL Command Reference Guide for Software Develo - Page 308
Cancel condensed character mode
View all Brother International HL-L2370DWXL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
Set pitch to 12 characters per inch EscM (27)(77) This command sets the printing pitch to 12 characters per inch (cpi). LPRINT CHR$(27); CHR$(77); 'Set pitch to 12 cpi Select / cancel proportional spacing Escpn (27)(112)n n This command allows you to turn proportional spacing on or off. Setting n to 1 turns proportional spacing on. Subsequent text is printed proportionally spaced. Setting n to 0 turns proportional spacing off. Subsequent text is printed monospaced. When you specify the value for n you can use the character codes for '0' and '1' (48 and 49) instead of 0 and 1. Selecting proportional spacing cancels condensed character mode. You cannot use the backspace, BS, code in proportional spacing mode. If you change the character pitch using Esc P or Esc M, proportional spacing is automatically turned off. LPRINT CHR$(27); CHR$(112); CHR$(1); 'Turn proportional spacing on Select condensed character mode I SI (15) This command selects condensed character mode. Subsequent text characters are condensed horizontally when printed. Selecting proportional spacing cancels condensed character mode. LPRINT CHR$(15); 'Set condensed character mode Select condensed character mode II EscSI (27)(15) This command selects condensed character mode. Subsequent text characters are condensed horizontally when printed. Selecting proportional spacing cancels condensed character mode. This command functions exactly like the SI control code. LPRINT CHR$(27); CHR$(15); 'Set condensed character mode Cancel condensed character mode DC2 (18) This command cancels condensed character mode. Subsequent text characters are printed normally. LPRINT CHR$(18); 'Cancel condensed character mode Select emphasized character mode EscE (27)(69) This command turns emphasized character mode on. Subsequent text is printed with a bold stroke width. LPRINT CHR$(27); CHR$(69); 'Turn emphasized character mode on Cancel emphasized character mode EscF (27)(70) This command turns emphasized character mode off. Subsequent text is printed with a medium stroke width. LPRINT CHR$(27); CHR$(70); 'Turn emphasized character mode off CHAPTER 6 EPSON - 18