Brother International HL-L2380DW Quick Setup Guide - Page 1

HL‑L2380DW / MFC‑L2720DW / MFC‑L2740DW Quick Setup Guide Not all models are available in all countries. The latest manuals are available at the Brother Solutions Center: solutions.brother.com/manuals. Version B USA/CAN Watch our FAQ Videos for help with setting up your Brother machine: solutions.brother.com/videos. Unpack the machine and check the components A Drum Unit (Pre‑installed) AC Power Cord (only for certain models) Quick Setup Guide CD‑ROM B Starter Toner Cartridge Telephone Line Cord Product Safety Guide (For MFC models) Basic User's Guide (only for certain models) Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure. Manuals in Spanish for this model are available on the enclosed CD-ROM. (USA only) Manuales en Español para este modelo están disponibles en el CD-ROM incluido. (sólo en Estados Unidos) NOTE: • The components included in the box and the AC power plug may differ depending on your country. • The illustrations in this Quick Setup Guide are based on the MFC‑L2740DW. • You must purchase the correct interface cable for the interface you want to use. USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long. Network cable Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE‑T or 100BASE‑TX Fast Ethernet Network. 1 Remove the packing materials and install the toner cartridge A B B B A A Remove the orange part. Remove the orange part. 2 Load paper in the paper tray Adjust the paper guides. 3 Connect the power cord and turn on the machine Back Front 4 Select your language (if needed) 1. On the machine's Touchscreen, press (Settings) > All Settings > Initial Setup > Local Language. 2. Press your language. 3. Press . 5 Configure the machine for faxing (for MFC models only) If you do not plan to use the fax feature on this machine, go to step 6. A. Connect the telephone line cord B. Set the date and time Press (Settings) > All Settings > Initial Setup > Date & Time. Date 1. Press Date. 2. Enter the last two digits for the year using the Touchscreen, and then press OK. 3. Enter the two digits for the month using the Touchscreen, and then press OK. 4. Enter the two digits for the day using the Touchscreen, and then press OK. Clock Type 1. Press Clock Type. 2. Press 12h Clock or 24h Clock. Time 1. Press Time. 2. Enter the time using the Touchscreen. „„ 12h Clock only Press AM/PM to select AM or PM. 3. Press OK. 4. Press . 6 Connect the machine to your computer/mobile device • Windows® PC with a CD-ROM drive, go to step 6A • Windows® PC without a CD-ROM drive, go to step 6B • Macintosh, go to step 6B • Mobile device users, go to step 6C