Brother International HL-L3210CW Command Reference Guide for Software Develope - Page 149
Select Color, Push/Pop Palette
View all Brother International HL-L3210CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
3.5. Select Color Command ESC*v#S (27)(42)(118)#(83) # # = 0 ~ current palette size Default value = 0 This command selects the color as the index number in the palette. This command is valid for text, underline, rule and graphics. This command does not affect the User-defined color pattern or HP-GL/2. (The HP-GL/2 command selects the color using the SP command.) The value to be selected by this command is never affected by the Set PCL Color Setting, Set Render Algorithm, Download Dither Matrix or Set Gamma Correction commands. 3.6. Push/Pop Palette Command ESC*p#P (27)(42)(112)#(80) # # = 0 * Push palette = 1 Pop palette * Default value = 0 The value of 0 pushes the current palette onto the palette stack. This command does not affect the current palette. The value of 1 pops the palette from the top of the palette stack and replacesthe current palette with it. If the Pop Palette command is executed without a Push palette having first having been executed, it is ignored. The palette stack is controlled as a First In Last Out stack. The parameters below are pushed to the palette stack; Color Mode (Simple Color / PCL Color Mode) Parameters to be set by the Set PCL Color Setting command Encoding Mode (mode 0, 1, 2, 3) Bits / index Bits / value #1 Bits / value #2 Bits / value #3 Black and White Reference Parameter of Render Algorithm Parameter of Gamma Correction Color Palette Dither to be downloaded by the Download Dither Matrix command Pen Width (HP-GL/2) The data below is pushed to the palette stack; Colors to be selected by the Select Color command Colors to be selected by the Set #1, #2, #3 command Monochrome Print Mode CHAPTER 3 PCL5C - 11