Brother International HL-L5200DWT Product Safety Guide - Page 3
Keep a minimum gap around the product as shown in the illustration.
![]() |
View all Brother International HL-L5200DWT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
DO NOT place the product near chemicals or in a place where chemicals could be spilled on it. Should chemicals come into contact with the product, there may be a risk of fire or electric shock. In particular, organic solvents or liquids such as benzene, paint thinner, polish remover, or deodorizer may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or electric shock. These or other chemicals may also cause the product to malfunction or become discolored. DO NOT put the product in a location that blocks or obstructs any slot or opening in the product. These slots and openings are provided for ventilation. Blocking the product's ventilation could create a risk of overheating and/or fire. Instead: • Keep a minimum gap around the product as shown in the illustration. (HL only) 5.9 in. (150 mm) 5.9 in. (150 mm) 5.9 in. (150 mm) 5.9 in. (150 mm) (MFC and DCP only) 11.8 in. (300 mm) 5.9 in. (150 mm) 5.9 in. (150 mm) 5.9 in. (150 mm) • Place the product on a solid level surface. • DO NOT place this product near or over a radiator or heater. • DO NOT place this product in a "built-in" installation unless adequate ventilation is provided. 3
![](/manual_guide/products/brother-international-hll5000d-product-safety-guide-9b43018/3.png)