Brother International HL-L6300DW Mass Deployment Tool Users Guide - Page 18
Command, Option, Description, connection only
View all Brother International HL-L6300DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Command apply mapply (network connection only) Option Required: ● Device identifier ● file Additional: ● password ● schema ● pjltable ● enumtable ● forcepjl ● forcenative ● ignorepjlerror ● skipvalidate ● skipverify ● networksettingpath ● log ● communitynameset ● communitynameget ● forcehttps Required: ● profile ● result Additional: ● schema ● pjltable ● enumtable ● forcepjl ● forcenative ● ignorepjlerror ● skipverify ● networksettingpath ● log ● communitynameset ● communitynameget ● forcehttps ● csvdelim ● createfileonly (*) ● outputdir *If you use "--createfileonly", you must also use "--outputdir". Description Allows you to send and apply the specified settings file and confirms the result. JSON, DPK, and EDPK files are supported. If the settings file is set to be password-protected, the tool will internally generate an encrypted package file and send it to the specified target device. Example: settingcmd.exe apply --ip IP_address --file your_file_name.json Allows you to send and apply the specified settings file to different devices with just one command by using a deployment profile. It also allows you to send and apply unique settings to each device. JSON, DPK, and EDPK files are supported. If the "mapply" command is used with the "--outputdir" option, the tool will output each device's intermediate files to the designated folder. If the "mapply" command is used with both the "--createfileonly" and the "--outputdir" options, the tool will only output each device's intermediate files to the designated folder, and will not apply the files to each device. Example: settingcmd.exe mapply --profile your_profile_name.csv --result your_filename.csv --csvdelim semicolon or settingcmd.exe mapply --profile your_profile_name.csv --result your_filename.csv --csvdelim semicolon --createfileonly --outputdir your_path You can confirm the result of each device in the result file (CSV format). The result file consists of all items in your deployment profile and the following items: - Result - Detail - Start time - Finish time - (Optional) Output: If the "mapply" command is used with the "--outputdir" option, the path for saving the intermediate file will be displayed here. 15