Brother International HL-L8250CDN Command Reference Guide for Software Develop - Page 172
HP-GL/2 - 16
View all Brother International HL-L8250CDN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
With type 1 scaling you can specify the percentage of unused space that is to lie below, or to the left of, the isotropic area. left specifies the percentage of unused space you want to lie to the left of the isotropic area and can be from 0 to 100. If you do not specify the value for left, it is automatically set to the default value = 50%. bottom specifies the percentage of unused space you want to lie below the isotropic area and can be from 0 to 100. If you do not specify the value for bottom, it is automatically set to the default value = 50%. (10,10) P2 P2 (10,10) Extra space P1(0,0) SC 0,10,0,10,1,0,0 (0,10) Extra space P1 SC0,20,0,10,1,100,100 Extra space (10,10)P2 Extra space P2 (20,10) P1 (10,0) P1(0,0) SC 0,10,0,10,1,100,100 SC 0,20,0,10,1,0,0 You must either specify both left and bottom, or specify neither. However, the printer can only use one of these two parameters at a time, depending where the extra space is on a page. ¥ If you do not specify a percentage for unused space to the left or at the bottom, the isotropic area is centred in the rectangle defined by P1 and P2. Type 2 scaling (point factor scaling) specifies the ratio of graphics units to user units and sets user units coordinates for P1. Xfactor specifies the number of graphics units that comprise a single user x-axis unit. Yfactor specifies the number of graphics units that comprise a single user y-axis unit. Valid values for Xfactor and Yfactor are real numbers. An SC command remains in effect until another SC command is issued, until default settings are restored with the DF command or until the printer is initialized with an IN command. 10 '-Scale-' 20 WIDTH "LPT1:", 255 30 LPRINT CHR$(27); "E"; 40 LPRINT CHR$(27); "%0B"; 50 LPRINT "IN;SP1;" 60 '-- Anisotropic scaling -70 LPRINT "PA1500,6000;EA3500,8000;" 80 LPRINT "IP1500,6000,3500,8000;SC0,200,0,100,0;PA50,50;CI50;" 90 LPRINT "IN;PA1500,3000;EA3500,5000;" 100 LPRINT "IP1500,3000, 3500,5000;SC0,100,0,200,0;PA50,50;CI50;" 110 LPRINT"IN;PA1300,8200;DT#;LBAnisotropic scaling#"; 120 '--Isotropic scaling-130 'Left,Bottom= 0,0 140 LPRINT "PA4500,6000;EA6500,8000;" 150 LPRINT"IP4500,6000,6500,8000;SC0,200,0,100,1,0,0;PA50,50;CI50;" 160 'Left, Bottom = 100,100 170 LPRINT "IN;PA4500,3000;EA6500,5000;" 180 LPRINT"IP4500,3000,6500,5000;SC0,100,0,200,1,100,100;PA50,50;CI50;" 190 LPRINT "IN;PA4000,82;DT#;LBIsotrop00ic scaling#"; 200 LPRINT CHR$(27);"%0A"; 210LPRINT CHR$(27);"E"; 220 END CHAPTER 4 HP-GL/2 - 16