Brother International HL-L8350CDW Quick Setup Guide - Page 1

HL-L8250CDN / HL-L8350CDW / HL-L8350CDWT Quick Setup Guide Unpack the machine and check the components Drum Unit (pre-installed) Waste Toner Box (pre-installed) Power Cord Toner Cartridges (Black, Cyan, Magenta and Yellow; pre-installed) Belt Unit (pre-installed) CD-ROM 1 Remove the packing material from the machine The latest manuals are available at Brother Solutions Center: http://solutions.brother.com/. Not all models are available in all countries. Version 0 ENG Quick Setup Guide Read the Product Safety Guide first, and then read this Quick Setup Guide for the correct installation procedure. NOTE: • The components included in the box and the AC power plug connection may differ depending on your country. • The illustrations in this Quick Setup Guide are based on the HL‑L8350CDW. • You must purchase the correct interface cable for the interface you want to use: USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long. Network cable Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network. Product Safety Guide 1 3 2 4 2 Load paper in the paper tray Adjust the paper guides. 1 3 2 3 Connect the power cord and turn on the machine The machine's LCD displays Ready. c Go to step 4 The machine's LCD displays Setup Wi-Fi?. c Go to step 5 4 Select your language 1. Press a or b to display General Setup, and then press OK. 2. Press OK to select Local Language. 3. Press a or b to select your language, and then press OK. Go to step 6 . 5 Wireless setup for WLAN models only If the machine's LCD displays Setup Wi-Fi? after you turn on, do one of the following: (To change the language) Press b to select No, and then back to step 4 . (To connect your computer) Press b to select No, and then go to step 6 . (To connect your mobile device) Press a to select Yes, and then go to Print using your mobile device in step 6 .