Brother International HL-L9310CDW Product Safety Guide - Page 11
IMPORTANT, cup of water. - drum
View all Brother International HL-L9310CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
When multiple devices, including this product, are connected to a computer using USB cables, you may feel an electric charge when you touch metal parts of the product. Some products and/or their cartons contain a silica gel pack. DO NOT eat the silica gel pack; throw it away. If you ingest it, seek medical attention immediately. DO NOT try to open a toner cartridge. If the toner powder leaks out, avoid inhaling it or letting it come in contact with your skin. Keep toner cartridges out of the reach of children. If a child swallows the toner powder, consult a doctor immediately. We recommend placing the toner cartridge and drum unit assembly on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner. If toner scatters on your hands or clothes, immediately wipe or wash it off with cold water. Should you come into contact with toner, follow these instructions: • Inhalation Obtain immediate medical attention. In case of accidental inhalation, move to fresh air immediately, then obtain medical attention. • Skin contact Remove contaminated clothing immediately and wash affected skin with plenty of water or soap and water. • Eye contact Obtain medical attention. If the toner has gotten into the eyes, immediately wash out the eyes with water continuously, for at least 15 minutes. • Ingestion Obtain immediate medical attention. Wash out mouth with water and drink 200 - 300 ml (one cup) of water. DO NOT run your hand over the edge of the paper. The thin and sharp edges of the paper may cause an injury. IMPORTANT • A distinct change in the product's performance may indicate a need for service. • DO NOT connect your product to an AC power outlet controlled by wall switches or automatic timers, or to the same circuit as a large appliance or other equipment that requires a significant amount of electricity. It could disrupt the power supply. Disruption of the power supply may also delete information from the product's memory, and repeated cycling of the power supply can damage the product. 11