Brother International Innov-is 2500D Users Manual - English - Page 33
Carefully pull the end of thread that was
View all Brother International Innov-is 2500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
LOWER/UPPER THREADING k Pull the thread up through the thread cutter to cut the thread, as shown in the illustration. n Carefully pull the end of thread that was passed through the eye of the needle. Note a Do not pull the thread strongly. Otherwise, the needle may bend or break. 1 Getting Ready a Thread cutter Note When using thread that quickly winds off the spool, such as metallic thread, it may be difficult to thread the needle if the thread is cut. Therefore, instead of using the thread cutter, pull out about 80 mm (approx. 3 inches) of thread after passing it through the thread guide disks (marked "7"). * If a loop was formed in the thread passed through the eye of the needle, carefully pull on the loop of thread through to the back of the needle. o Pull out about 100 mm (approx. 3-4 inches) of the thread, and then pass it under the presser a foot toward the rear of the machine. a 80 mm or more l Lower the needle threader lever slowly until it clicks. * The hook is rotated and passes through the eye of the needle. Note • If the needle threader lever is lowered quickly, the needle may not be threaded. • Make sure that no objects, such as the fabric, are touching the hook. a a 100 mm p Press the "Presser Foot Lifter" button to lower the presser foot before starting to sew. Memo This completes the upper threading procedure. b a a Hook b Needle thread lever m Release the needle threader lever. → The thread passes through the eye of the needle. Note • The needle threader can be used with home sewing machine needles 75/11 through 100/16. For details on appropriate needle and thread combinations, see "Fabric/Thread/Needle Combinations" on page 37. • If automatic needle threading could not be completed correctly, repeat the procedure, starting with the needle bar thread guide (marked "6"). • Some needles cannot be threaded with the needle threader. In this case, instead of using the needle threader after passing the thread through the needle bar thread guide (marked "6"), manually pass the thread through the eye of the needle from the front. 31