Brother International Innov-is 4000D/4000 Software Users Manual/3.0 Operat - Page 10
Automatic Fabric Sensor System (Automatic Presser Foot Pressure), Set AUTOMATIC FABRIC SENSOR SYSTEM
View all Brother International Innov-is 4000D/4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
c Place the fabric under the presser foot with the needle at the starting point of the stitching, and then press the "Start/Stop" button. The machine will begin sewing. Automatic Fabric Sensor System (Automatic Presser Foot Pressure) The thickness of the fabric is automatically detected and the presser foot pressure is automatically adjusted with an internal sensor while sewing, so your fabric is fed smoothly. The fabric sensor system works continuously while sewing. This function is useful for sewing over thick seams, or quilting. Memo If you press the "Start/Stop" button to pause sewing, then press it again to continue, reverse stitches (or reinforcement stitches) will not be sewn. d Press the "Start/Stop" button to stop the machine at the point where the sewing direction changes. → The machine stops with the needle in the fabric, and the presser foot is raised. e Rotate the fabric, and then press the "Start/ Stop" button. a Press . → The settings screen appears. b Set "AUTOMATIC FABRIC SENSOR SYSTEM" to "ON". → The presser foot is automatically lowered, and sewing continues. c Press to return to the original screen. 9