Brother International Innov-is 4500D Operation Manual - Page 90
When Sewing Straight Stitches, While Using the Side Cutter
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
SEWING THE STITCHES I When Sewing Straight Stitches While Using the Side Cutter The seam margin should be approximately 5 mm (approx. 3/16 inch). a a Seam margin Memo • The fabric will not be cut if the whole fabric is simply spread out underneath the presser foot guide plate. Set the fabric as explained in step f from the previous section, and then start sewing. • One layer of 13 oz. denim can be cut. • Clean the side cutter after use to avoid hav- ing dust and scraps of thread build up on it. • Add a small amount of oil as required to the cutting edge of the cutter. 78
SEWING THE STITCHES
78
■
When Sewing Straight Stitches
While Using the Side Cutter
The seam margin should be approximately 5 mm
(approx. 3/16 inch).
a
Seam margin
Memo
•
The fabric will not be cut if the whole fabric is
simply spread out underneath the presser
foot guide plate. Set the fabric as explained
in step
f
from the previous section, and
then start sewing.
•
One layer of 13 oz. denim can be cut.
•
Clean the side cutter after use to avoid hav-
ing dust and scraps of thread build up on it.
•
Add a small amount of oil as required to the
cutting edge of the cutter.
a