Brother International Innov-is 4500D Software Users Manual/4.0 Operation Manua - Page 12
If the Bobbin Runs Out of Thread, Selecting a New Border Pattern
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
■ If the Bobbin Runs Out of Thread If the bobbin runs out of thread while embroidering, the machine stops and a message appears. Follow the procedure described below to replace the bobbin thread. Memo • For details, refer to "If the Bobbin Runs Out of Thread" in chapter 5 of the Operation Manual for the sewing machine. a Press . Selecting a New Border Pattern 150 decorative stitch patterns have been added as border patterns. For details on the patterns, refer to "List of New Patterns" at the end of this guide. If the border embroidery frame is used, repeated patterns can easily be embroidered since the fabric can easily be rehooped. The following procedure describes how to select a pattern in embroidery edit mode. a Press . b Press . b Press . → The thread is automatically cut and the embroidery unit carriage moves to its initial position. c Raise the frame-securing lever on the embroidery unit, and then remove the border embroidery frame. d Install the bobbin wound with thread. e Press , and then attach the border embroidery frame to the embroidery unit. c Press the key of the desired pattern from the new border patterns on P. 7 through P. 16. f Press the "Start/Stop" button to return to the position where embroidering was stopped, and continue embroidering. d If necessary, use the border function to repeat the pattern. 11