Brother International Innov-is BQ3100 Operation Manual - Page 122
Appliqué Sharp Curves
![]() |
View all Brother International Innov-is BQ3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
SEWING THE STITCHES a Wrong side of fabric b Right side of fabric l Sew with the fold of presser foot guide. the hem against the m Press the "Start/Stop" button to stop sewing when you are finished, and raise the presser foot and needle to pull the fabric under the presser foot towards the back of the machine. b Select or . * Adjust the stitch length and width to correspond to the appliqué shape, size, and quality of material (see page S-10). Memo • For details on each stitch, refer to the "STITCH SETTING CHART" on page S-67. c Attach needle presser foot "J". Check that the drops slightly off the edge of the appliqué, then start sewing. Note • Be sure to pull the fabric towards the back of the machine after sewing. If you pull the fabric toward side or forward, the presser foot may be damaged. n Remove the the fabric. basting stitching and reverse a Appliqué material 1 2 a Wrong side of fabric b Right side of fabric Appliqué a Use a temporary spray adhesive, fabric glue or a basting stitch to attach the appliqué to the fabric. * This will keep the fabric from moving during sewing. a Needle drop position ■ Appliqué Sharp Curves Stop the machine with the needle in the fabric outside the appliqué. Raise the presser foot and turn the fabric a little bit at a time while sewing for an attractive finish to the seam. a Appliqué b Fabric glue S-48
![](/manual_guide/products/brother-international-innovis-bq3100-operation-manual-7a003a1/122.png)