Brother International Innov-is NQ1400E Operation Manual - Page 35
Starting To, Embroider
View all Brother International Innov-is NQ1400E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2 Chapter STARTING TO EMBROIDER Embroidery Step by Step Follow the steps below to prepare the machine for embroidery. Step 8 Embroidery Step by Step B STARTING TO EMBROIDER Step 2 Step 6, 7 Step 1 Step 3 Step 4 Step 5 Step # 1 2 3 4 5 6 7 8 Aim Checking the needle Embroidery unit attachment Bobbin thread setup Fabric preparation Embroidery frame attachment Pattern selection Checking the layout Embroidery thread setup Action Use needle 75/11 for embroidery. * Attach the embroidery unit. For the bobbin thread, wind embroidery bobbin thread and set it in place. Attach a stabilizer material to the fabric, and hoop it in the embroidery frame. Attach the embroidery frame to the embroidery unit. Turn the main power to on, and select an embroidery pattern. Check and adjust the size and position of the embroidery. Set up embroidery thread according to the pattern. Page B-23 B-26 B-17 B-29 B-35 B-9 B-35 B-28 * It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example; denim, puffy foam, etc.). Basic operations B-25