Brother International Innov-is XJ2 Operation Manual - Page 30

WIRELESS NETWORK CONNECTION FUNCTIONS Enabling a Wireless Network Connection The machine can be connected to your wireless network. Refer to "SPECIFICATIONS" on page 194 for requirements for a wireless network connection. a Touch . b Set [Wireless LAN Enable] to [ON]. b Touch beside [Wireless LAN Setup Wizard].  A list of available SSIDs appears. c Touch beside the SSID that was noted.  The machine begins to emit the wireless network signal. Using the Wizard to Set Up the Wireless Network Connection There are multiple ways to set up the wireless network connection. We recommend the method that uses the wizard on this machine. a In order to connect your machine network, the security information to a wireless (SSID and network key) for your home network will be required. The network key may also be called a password, security key or encryption key. First, find your security information and note it. SSID Network Key (Password) Memo • The wireless network connection cannot be set up if you do not have the security information. • How to find the security information 1 Check the manual provided with your home network. 2 The default SSID may be the manufacturer's name or the model name. 3 If you cannot find the security information, contact the manufacturer of the router, your network administrator or your Internet provider. 4 Some SSIDs and network keys (passwords) are case (upper case and lower case) sensitive. Please properly record your information. 28  The screen for entering the network key (password) appears. Memo • If the SSID that was noted does not appear in the list, touch . • If the desired network SSID is not displayed, specify it as described below. 1 Select . 2 Enter the desired network SSID, and then touch . 3 Select the authentication method and encryption mode. • If the machine had already been connected to the home network, touch saved SSID. , and then select the