Brother International IntelliFax-4100 Users Manual - English - Page 113
Phone Line or Connections, Fax Start, Sending Faxes, DIFFICULTY, SUGGESTIONS
UPC - 012502616399
View all Brother International IntelliFax-4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
DIFFICULTY SUGGESTIONS Phone Line or Connections Dialing does not work. Check for a dial tone. Change TONE/PULSE setting (See Setting Tone/Pulse Dialing Mode, Page 4-8). Check all line cord connections, and make sure the curled handset cord is not in the EXT jack. Check power cord connection. Send a manual fax by pressing Hook-OR-by lifting the handset, and dialing the number. Wait to hear the fax receiving tones before pressing Fax Start. The machine does not answer when called. Make sure the machine is in the correct receiving mode for your setup (either FAX, FAX/TEL or TAD). Check for dial tone. If possible, call your machine to hear it answer. If there is still no answer, check the telephone line cord connection. Connect a standard telephone handset to the machine telephone jack. If there is no ringing when you call your machine, call your Telephone Company to check the line. There is no dial tone on the handset. Press Hook-OR-Lift the handset. If you hear no dial tone, check telephone line cord connections at the machine and wall jack. Check that the handset curled cord is connected to the machine's handset jack. Test the jack with another single line telephone. If no dial tone on the wall outlet, call your telephone company. Sending Faxes Transmitting quality is Try changing your resolution to FINE or S. FINE poor. (See Fax Resolution, Page 6-5). Make a copy to verify the machine's scanner operation. Transmission Verification Report prints "Results:NG". There is probably temporary noise or static on the phone line. Try sending the fax again. If the problem continues, call the Telephone Company to check your phone line. The receiving party says the picture is not clear. Sometimes the resolution mode you chose when you sent your fax was not appropriate. Send the fax again, but try using the FINE or S. FINE mode. Also, your machine's scanner may be dirty, so try cleaning it. (See page 13-18) The receiving party says Your machine's scanner may be dirty or the receiving vertical streaks appear party's print head may be dirty. Clean your scanner on the faxes they (see page 13-18), and then make a copy to check if the receive. problem was caused by your machine. T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E 13 - 7