Brother International KE-484C Instruction Manual - English - Page 36
SEWING, Depress the start switch 3.
View all Brother International KE-484C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
8. SEWING 8. SEWING CAUTION Turn off the power switch at the following times, otherwise the machine may operate if the foot switch is depressed by mistake, which could result in injury. • When threading the needle • When replacing the needle and bobbin • When not using the machine and when leaving the machine unattended. Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. Before starting sewing ...... • Check that the needle bar is at its highest position. Turn the machine pulley so that the index mark (1) on the pulley is between the marks (2) on the belt cover. * If the machine pulley stop position is incorrect, error "E- 50" may be displayed, or the wiper may come into contact with the needle and break the tip of the needle. 1. Turn on the power switch. (The POWER indicator will illuminate and the program number will flash in the display.) 2. Depress the start switch (3). (The feed mechanism will move to the starting position and the work clamp will rise.) 2462Q 3. Place the material to be sewn under the work clamp (4), and then depress the work clamp switch (5) to lower the work clamp (4), and depress the start switch (3). 3191Q 3192Q 3193Q 4. Once sewing is completed and the thread has been trimmed, feed will move automatically to the next starting point and the work clamp (4) will rise. KE-484C 30