Brother International LS-1717P Users Manual - Multi - Page 48
Methode Facultative Pour Les Boutonnieres, Etape D: Côté Droit
View all Brother International LS-1717P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
CONTENTS KNOWING YOUR SEWING MACHINE STRAIGHT AND ZIGZAG BUILT-IN STITCHES STITCHING OPTIONAL PROCEDURE FOR BUTTONHOLES Step A: Bar Tack 1. Set the needle position at L, stitch width at 5 and stitch length at 0. 2. Lower the presser foot and sew 3 to 4 stitches. 3. Stop the machine when the needle is in the fabric and at the left side of the stitches. (position A) Step B: Left Row 1. Set the stitch width at 2 and stitch length at F. 2. Sew the desired length in reverse. 3. Stop the machine when the needle is in the fabric at the left side of the stitches. (position B) Step C: Final Bar Tack 1. Set the stitch width at 5 and stitch length at 0. 2. Sew 3 to 4 stitches. 3. Stop the machine when the needle is in the fabric and at the right side of the stitches. (position C) Step D: Right Row 1. Set the needle position at R, stitch width at 2 and stitch length at F. 2. Sew until the needle reaches the other bar tack. 3. Stop the machine when the needle is in the fabric and at the right side of the stitches. (position D) Step E: Securing Buttonhole Stitch 1. To secure stitching, set the stitch width to 0. Turn the fabric 90 degrees counterclockwise and sew 5 - 6 straight stitches. (fig. E) 2. Remove the fabric from the machine. METHODE FACULTATIVE POUR LES BOUTONNIERES Etape A: barre d'arrêt 1. Régler l'aiguille sur L , la largeur de point sur 5 et la longueur de point sur 0. 2. Abaisser le pied-de-biche et faire 3 à 4 points. 3. Arrêter la machine lorsque l'aiguille se trouve dans le tissu et à gauche des points (emplacement A). Etape B: côté gauche 1. Régler la largeur de point sur 2 et la longueur de point sur F. 2. Coudre la longueur désirée en marche arrière. 3. Arrêter la machine lorsque l'aiguille se trouve dans le tissu et à gauche des points (emplacement B). Etape C: dernière barre d'arrêt 1. Régler la largeur de point sur 5 et la longueur de point sur 0. 2. Faire 3- 4 points. 3. Arrêter la machine lorsque l'aiguille se trouve dans le tissu et à droite des points (emplacement C). Etape D: côté droit 1. Régler la position de l'aiguille sur R, la largeur de point sur 2 et la longueur de point sur F. 2. Coudre jusqu'à ce que l'aiguille atteigne l'autre barre d'arrêt. 3. Arrêter la machine lorsque l'aiguille se trouve dans le tissu et à droite des points (emplacement D). Etape E: Consolider les points de la boutonnière 1. Pour consolider les points, régler la largeur de point sur 0. Faire pivoter le tissu de 90 degrés dans le sens contraire des aiguilles d'une montre et faire 5 - 6 points droits (fig. E). 2. Retirer le tissu de la machine. BUTTONHOLE AND USING ATTACHMENTS BUTTON SEWING AND APPLICATIONS MAINTENANCE INDEX B A 38 C (E) D