Brother International LS-590 Users Manual - English and Spanish - Page 11
Knowing Your Sewing Machine - manual
View all Brother International LS-590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
KNOWING YOUR SEWING MACHINE 1 KNOWING YOUR SEWING MACHINE THE MAIN PARTS 1 Bobbin winder (page 26) This winds the thread onto the bobbin for use as the lower thread. 2 Spool pin (page 27, 32) This holds the spool of thread. 3 Thread guide (page 27, 32) This is used when winding the thread onto the bobbin and then threading the machine. 4 Thread take-up lever (page 33) 5 Hole for extra spool pin (page 37) This holds a second spool of thread for sewing with the twin needle. 6 Stitch width dial (page 25) This controls the stitch width. 7 Upper tension-control dial (page 38) This controls the tension of the upper thread. 8 Thread cutter (page 43) Pass the threads through the thread cutter to cut them. 9 Needle threader (page 34) (This is only available on certain models.) 0 Quick-set bobbin (page 30) (This is only available on certain models.) A Flat bed attachment with accessory compartment (page 19) B Presser foot (page 18) C Reverse sewing lever (page 25) You can push this to stitch in the reverse direction. 10 D Pattern selection dial (page 20) You can turn this in either direction to choose the stitch you want. E Stitch length dial (page 24) This controls the stitch length. F Buttonhole fine-adjustment screw (page 54) G Handwheel Used to manually raise and lower the needle. H Main power and sewing light switch (page 15) You can turn the main power and sewing light switch on and off. I Foot controller jack / socket (page 15) Plug in the foot controller plug and connect the machine to the power supply. J Presser foot lever (page 32) Used to raise and lower the presser foot. K Buttonhole lever (1-Step automatic buttonhole) (page 52) Lower the buttonhole lever when sewing buttonholes. L Foot controller (page 15) You can use this to control the sewing speed, and to start and stop sewing. Parts Code for Zigzag Presser Foot: XC4901-051 Foot Controller: Model KD-1902 Parts Code: XC7359-022 (110/120V Area) XC7438-222 (220/240V Area) XC7456-222 (U.K.) XC7455-022 (Australia, New Zealand)