Brother International Laura Ashley Innov-is NX800 Users Manual - English - Page 80
Sewing overcasting stitches using the side cutter
View all Brother International Laura Ashley Innov-is NX800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
UTILITY STITCHES Sewing overcasting stitches using the side cutter Using the side cutter, seam allowances can be finished while the edge of the fabric is cut off. Five stitches can be used to sew overcasting stitches with the side cutter. Pattern Stitch Name Application 63 64 Overcasting 65 stitch 66 67 Sewing straight stitches while cutting the fabric Sewing zigzag stitches while cutting the fabric Preventing fraying in thin and medium weight fabrics while cutting the fabric Preventing fraying in thick fabrics while cutting the fabric Preventing fraying in thick fabrics while cutting the fabric Stitch Width [mm (inch)] Auto Manual 0.0 0.0-2.5 (0) (0-3/32) Stitch Length [mm (inch)] Auto Manual Presser Foot 2.5 0.2-5.0 (3/32) (1/64-3/16) 3.5 3.5-5.0 1.4 0.0-4.0 (1/8) (1/8-3/16) (1/16) (0-3/16) 3.5 3.5-5.0 2.0 1.0-4.0 (1/8) (1/8-3/16) (1/16) ( 1/16-3/16) S 5.0 3.5-5.0 2.5 1.0-4.0 (3/16) (1/8-3/16) (3/32) ( 1/16-3/16) 5.0 3.5-5.0 2.5 1.0-4.0 (3/16) (1/8-3/16) (3/32) ( 1/16-3/16) Hook the connecting fork of the side cutter d onto the needle clamp screw. a Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page 41). Lower the presser foot lever, and then b manually thread the needle. • The needle threader cannot be used. If the needle threader is used with the side cutter, the sewing machine may be damaged. Raise the presser foot lever. c b a Connecting fork b Needle clamp screw Position the side cutter so that side cutter pin e is aligned with the notch in the presser foot holder, and then slowly lower the presser foot lever. b a a Notch in presser foot holder b Pin X The side cutter is attached. 78