Brother International MFC-210C Quick Setup Guide - English - Page 30
Make sure that you have completed the instructions from Step 1 Setting Up - printer mfc
UPC - 012502610830
View all Brother International MFC-210C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Step 2 Installing the Driver & Software For Network Interface Cable Users (MFC-420CN, MFC-620CN only) For Mac OS® 8.6 to 9.2 Make sure that you have completed the instructions from Step 1 "Setting Up the Machine" on pages 4 - 11. 1 Turn off and unplug the machine from the AC outlet and disconnect it from your Macintosh® if you already connected an interface cable. 2 Turn on your Macintosh®. 3 Insert the supplied CD-ROM into your CD-ROM drive. 6 Follow the on-screen instructions, and restart your Macintosh®. 7 Connect the network interface cable to the machine, and then connect it to a free port on your hub. To connect the network interface cable to the machine: 1. Open the scanner cover to its open position. 2. Insert the network cable into the LAN socket, marked with a symbol. You will find the LAN socket above and to the left of the ink cartridge slots, as shown below. 4 Double-click the Start Here icon to install the printer and scanner drivers. If the language screen appears, select your language. 3. Carefully route the network cable through the trench and out the back of the machine as shown below. 5 Click MFL-Pro Suite to install. Warning Ensure that the cable does not restrict the cover from closing, or an error may occur. In case of using both USB and LAN cables, route both cables through the trench. 28