Brother International MFC 795CW Quick Setup Guide - English - Page 37
On-Line Registration, DO NOT cancel any of the screens during
UPC - 012502623311
View all Brother International MFC 795CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Wireless Network Windows® Note • If there is more than one machine connected to the network, choose your machine from the list, and then click Next. This window will not appear if there is only one machine connected on the network, it will be chosen automatically. i The installation of the Brother drivers will automatically start. The installation screens appear one after another. IMPORTANT DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear. Note For Windows Vista®, when this screen appears, click the check box and click Install to complete the installation correctly. • If your wireless settings fail, an error message will appear during the installation of MFL-Pro Suite and the installation will be terminated. Confirm your settings by following the on-screen instructions. If you encounter this failure, go to step 19-a on page 30 and setup the wireless connection again. • If you are using WEP and the LCD displayed Connected but your machine is not found, make sure you entered the WEP key correctly. The WEP key is case sensitive. • If the IP address of the machine is not yet configured for use on your network, the following screen appears. j When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructions. Once you have completed the registration process, close your web browser to return to this window. Then click Next. Click OK and then click Configure IP Address. Enter an IP address for your machine that is suitable for your network by following the on-screen instructions. Windows® Macintosh Wireless Network 37