Brother International MFC 8500 Service Manual - Page 54
by pulling its pawls outwards., Remove the separation roller gear in the direction of arrow
UPC - 012502603832
View all Brother International MFC 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
(7) Remove the document take-in roller gear (in the direction of arrow Q) by pulling its pawls outwards. Slightly push down the arm (arrow R) and shift the document take-in roller shaft to the left (arrow S) and take it up. Then shift the document take-in roller to the left and take it up. (8) Remove the separation roller gear (in the direction of arrow Q) by pulling its pawls outwards. Slightly push down the arm (arrow R) and shift the separation roller shaft to the left (arrow S) and take it up. Then shift the separation roller to the left and take it up. (9) Remove the two pressure roller leaf springs by pulling them in the direction of arrows Q and R in this order as shown below. Then remove the pressure rollers and shaft. (10) Remove the two control panel locks (leaf springs) with a flat screwdriver in the direction shown below. IV - 13