Brother International MFC 9600 Service Manual - Page 71
Relay PCB, Relay PCB, Reassembling Notes
UPC - 012502564836
View all Brother International MFC 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
1.8 Relay PCB (1) Disconnect the following harnesses from the relay PCB: - Speaker harness - Main-relay (panel) harness - Main-relay (CCD) harness - Main-relay (motors) harness (2) Remove the two screws. (3) Take out the relay PCB. n Reassembling Notes • When setting the relay PCB back into place, be careful with the installation direction. The printed letters should not be upside down. IV - 25
IV
- 25
1.8
Relay PCB
(1)
Disconnect the following harnesses from the relay PCB:
- Speaker harness
- Main-relay (panel) harness
- Main-relay (CCD) harness
- Main-relay (motors) harness
(2)
Remove the two screws.
(3)
Take out the relay PCB.
n
Reassembling Notes
•
When setting the relay PCB back into place, be careful with the installation direction.
The
printed letters should not be upside down.