Brother International MFC 9760 Service Manual - Page 171
Refer to ERROR, Check the connection of the polygon motor harness on
View all Brother International MFC 9760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Trouble (12) Faulty image registration (Leading edge of image starts too late on paper) Action to be taken At the printer side l Instruct the user not to load paper exceeding the limit on the paper cassette(s). l Instruct the user to use the recommended types of paper. l Replace the paper cassette(s). l Check the position of the registration sensor. l Replace the drive gear ASSY. (13) Image distortion or improper image alignment (14) Blurred at either side In communications Check the following components: - Error code displayed. (Refer to Section 1, "ERROR INDICATION" in this chapter.) - NCU PCB - Main PCB At the scanner Check the following components: - ADF unit - CCD motor and its harness - Main PCB At the printer side l Check that the laser unit is secured with the screws without looseness. l Check the connection of the polygon motor harness on the engine PCB. l Check the connection of the laser flat cable on the main PCB. l Replace the laser unit. At the printer side l Check that the machine is placed on a flat surface. l Shake the toner cartridge horizontally. If the problem persists, replace it. l Clean the laser beam window (glass) on the laser unit. l Replace the laser unit. VI - 25