Brother International MFC-9880N Service Manual - Page 101
NCU Shield and NCU PCB, See the illustration given on the next
View all Brother International MFC-9880N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
1.21 NCU Shield and NCU PCB* (*Provided on models supporting facsimile function.) (1) Remove three screws from the NCU shield, then take off the NCU shield. (2) USA version: Disconnect the main-NCU harness from the main PCB. European version: Disconnect the main-NCU harness and main-NCU harness 2 from the main PCB. See the illustration given on the next page. (3) Remove the screw from the NCU PCB and take out the PCB. IV - 55
IV
- 55
1.21
NCU Shield and NCU PCB*
(*Provided on models supporting facsimile function.)
(1)
Remove three screws from the NCU shield, then take off the NCU shield.
(2)
USA version: Disconnect the main-NCU harness from the main PCB.
European version: Disconnect the main-NCU harness and main-NCU harness 2 from the main
PCB.
See the illustration given on the next page.
(3)
Remove the screw from the NCU PCB and take out the PCB.