Brother International MFC-J265w Advanced Users Manual - English - Page 45
Cleaning the scanner,
UPC - 012502625056
View all Brother International MFC-J265w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Cleaning the scanner A a Lift the document cover (1). Clean the scanner glass (2) and the white plastic (3) with a soft lint-free cloth moistened with a non-flammable glass cleaner. 1 3 Routine maintenance Note In addition to cleaning the scanner glass and glass strip with a non-flammable glass cleaner, run your finger tip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning attempt. i 2 b (MFC-J410W and MFC-J415W only) In the ADF unit, clean the white bar (1) and the glass strip (2) with a lint-free cloth moistened with a non-flammable glass cleaner. When there is a spot of dirt or correction fluid on the glass strip the printed sample shows a vertical line. After the glass strip is cleaned the vertical line is gone. A 1 2 39