Brother International MFC-J425W Advanced Users Manual - English - Page 38
Packing and shipping the machine - ink cartridge for
View all Brother International MFC-J425W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Packing and shipping the machine A When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine properly, any damage that may occur in transit may not be covered by your warranty. IMPORTANT It is important to allow the machine to "park" the print head after a print job. Listen carefully to the machine before unplugging it to make sure that all mechanical noise has stopped. Not allowing the machine to finish this parking process may lead to print problems and possible damage to the print head. a Open the ink cartridge cover. b Press the ink release levers to release the ink cartridges and then take out the ink cartridges. (uuBasic User's Guide: Replacing the ink cartridges) c Install the orange protective part and then close the ink cartridge cover. IMPORTANT • Make sure the plastic tab on the right side of the orange protective part (1) clicks securely into place (2). 1 2 • If you are not able to find the orange protective part, ship the machine without it. DO NOT install the ink cartridges as an alternative before shipping. d Lift the machine from the front and hook the tab of the orange protective part into the keyed opening (1) on the bottom of the paper tray. Then latch the protective part over the raised portion of the paper tray (2). 2 1 34