Brother International MFC-J630W Basic Users Manual - English - Page 53
Using a non-Brother cordless external telephone, Using remote codes, Fax Receive code
View all Brother International MFC-J630W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Telephone services and external devices Using a non-Brother cordless external telephone 6 If your non-brother cordless telephone is connected to the EXT. jack of the machine and you typically carry the cordless handset elsewhere, it is easier to answer calls during the Ring Delay. If you let the machine answer first, you will have to go to the machine so you can press Hook to send the call to the cordless handset. Using remote codes 6 Fax Receive code 6 If you answer a fax call on an extension telephone, you can tell your machine to receive it by dialing the Fax Receive Code l 5 1. Wait for the chirping sounds and then replace the handset. (See Easy Receive on page 31.) If you answer a fax call at the external telephone connected to the EXT. jack of the machine, you can make the machine receive the fax by pressing Black Start and choosing Receive. Telephone Answer Code 6 If you receive a voice call and the machine is in F/T mode, it will start to sound the F/T (pseudo/double) ring after the initial ring delay. If you pick up the call on an extension telephone you can turn the F/T Ring off by pressing # 5 1 (make sure you press this between the rings). If the machine answers a voice call and pseudo/double-rings for you to take over, you can take the call at the external telephone connected to the EXT. jack of the machine by pressing Hook. Changing the remote codes 6 The preset Fax Receive Code is l 5 1. The preset Telephone Answer Code is # 5 1. If you want to, you can replace them with your own codes. a Press Menu. b Press a or b to choose Fax. Press OK. c Press a or b to choose Setup Receive. Press OK. d Press a or b to choose Remote Codes. e Press d or c to choose On (or Off). 6 Press OK. f Enter the new Fax Receive Code. Press OK. g Press a or b to choose Tel Answer: and enter the new Telephone Answer Code. Press OK. h Press Stop/Exit. Note • If you are always disconnected when accessing your external TAD remotely, try changing the Fax Receive Code and Telephone Answer Code to another threedigit code (such as # # # and 9 9 9). • Remote Codes might not work with some telephone systems. 39