Brother International MFC-L9570CDW Quick Setup Guide - Page 1

MFC‑L9570CDW Quick Setup Guide Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure. The latest manuals are available at the Brother Solutions Center: solutions.brother.com/manuals. D01GT7001-00 USA/CAN Version B Unpack the machine and check the components * Already installed in the machine Drum Unit* Waste Toner Box* Belt Unit* Watch our Video FAQs for help with setting up your Brother machine: solutions.brother.com/videos. Toner Cartridges* (Black, Cyan, Magenta and Yellow) Brother Installation Disc Telephone Line Cord Quick Setup Guide AC Power Cord Product Safety Guide NOTE: • Manuals in Spanish for this model are available on the Brother Solutions Center. (USA only): solutions.brother.com/manuals Los manuales en español de este modelo están disponibles en el Brother Solutions Center. (Solamente en los Estados Unidos): solutions.brother.com/manuals • The components included in the box may differ depending on your country. • The available connection interfaces vary depending on the model. • Interface cables are not included. You must purchase the correct interface cable if you require one. USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long. Network cable Use a straight-through Category 5e (or greater) twistedpair cable. 1 Remove the packing materials and install the drum unit and toner cartridge assembly Remove the packing tape. 3 1 4 2 2 Load paper in the paper tray Adjust the paper guides. Do not exceed this mark. 3 Connect the power cord and turn on the machine 4 Connect the telephone line cord If you do not plan to use the fax feature on this machine, go to step . Back Front 5 Select your language (if needed) 1. On the machine's Touchscreen, press [All Settings] > [Initial Setup] > [Local Language]. 2. Press your language. 3. Press . 6 Configure the machine for faxing If you do not plan to use the fax feature on this machine, go to step . NOTE: • For more information on using the fax feature, see the Online User's Guide. • Your machine is programmed to automatically receive faxes. To change this default mode, see the Online User's Guide. A. Set the date and time Press [All Settings] > [Initial Setup] > [Date & Time], and then set the date and time you want. B. Set the Station ID Press [All Settings] > [Initial Setup] > [Station ID], and then set your fax or telephone number and your name.