Brother International PE-190D Users Manual - English and Spanish - Page 25
Fitting the embroidery frame to the machine, Removing the embroidery frame, holder
View all Brother International PE-190D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
CONTENTS MACHINE KNOWLEDGE EMBROIDERING MAINTENANCE ERROR MESSAGE TROUBLESHOOTING Fitting the embroidery frame to the machine 1. Raise the presser foot to its highest position. Then pass the embroidery frame under the presser foot with the mounting pins on the right side and the fabric right side up. 1 Frame holder 2 Pins 2. Align the two pins on the embroidery frame with the frame holder, and then insert the frame into the frame holder until a click is heard. * Be sure to insert both pins. If only the forward or the back pin is inserted, the pattern may not turn out correctly. 1 Frame holder 2 Pins Removing the embroidery frame Push the release lever to the right and remove the embroidery frame by pulling up. 1 Release lever 22 PATTERNS EMBROIDERING USING A SMALL FRAME (OPTIONAL) EMBROIDERING USING A EXTRA-SMALL FRAME (OPTIONAL) EMBROIDERING USING A LARGE FRAME (OPTIONAL)