Brother International PJ-663 P-touch Template Manual/ Command Reference - Page 16

16

CODABAR: 4 to 64 characters (with “A”, “B”, “C” or “D” at the beginning and end)

CODE128: 1 to 64 characters

GS1-128 (UCC/EAN-128): 1 to 64 characters

When trying to transfer data exceeding the ranges describe above, an error will occur

while transferring. If the data that is fed does not meet the minimum limit, the bar code is

not printed. If the data exceeds the maximum limit, only the data to the maximum limit is

applied. However, if the data exceeds 64 characters, the bar code is not printed.

·

If a template is created in P-touch Editor with an extremely low bar code bar height, the

bars may not be printed.

●

CODE39

·

When feeding data, the asterisks (*) at the beginning and end of the data are skipped.

●

I-2/5

·

The bearer bar setting specified in P-touch Editor is invalid.

●

GS1-128 (UCC/EAN-128)/CODE128

·

If the bar code width has been set to “Minimum” in P-touch Editor, the characters below the

bar code are not printed, even if the “Show Characters” setting has been selected.

●

QR Code

·

The version setting for a QR Code specified in P-touch Editor is invalid. The version setting

must be turned off.

·

The joining setting specified in P-touch Editor is invalid.

●

PDF417

·

Since the error correction levels for PDF417 specified in P-touch Editor are inconsistent

with those on the

printer

, the size of the bar code may change when it is printed with

P-touch Template.

·

The width for PDF417 specified in P-touch Editor may change from “Minimum” to “Small”.

·


●

DataMatrix

·


·

Macro settings specified in P-touch Editor are invalid.

■

Relating to images

·

If a template containing overlapping images is transferred with P-touch Editor, all image

data will be overlapping. (P-touch Editor displays the image created last on top.)

Section	Page
P-touch Template Manual	1
Introduction	4
What is P-touch Template?	4
How to use P-touch Template	5
P-touch Template Settings Tool User’s Guide	6
P-touch Template Limitations	11
Precautions	19
Appendix: Specifications	22
P-touch Template Command Reference	23
Control Code List	30
Commands that can be set or obtained in P-touch Template mode	30
Commands that can be set or obtained in maintenance mode	31
About P-touch Template	32
Static and dynamic commands	32
If printing does not begin (main most frequent causes)	32
Control Command Details	33
^PT Specify print start trigger selection	33
^PS Specify print start command text string	34
^PC Specify print start received character count	35
^SS Specify delimiter	36
^TS Specify template selection	37
^LS Specify line spacing with line return	38
^CC Change the prefix character	39
^RC Specify line return command text string	40
^CN Specify number of copies	41
^II Initialize	42
^SR Status request	43
^VR Retrieve version Information	46
^CR Line return in object	46
^OS Specify object selection (object number)	47
^ON Specify object selection (object name)	47
^DI Direct object insertion	48
ESC ia Specify command mode	48
ESC iXT2 Specify print start trigger selection	49
ESC iXP2 Specify print start command text string	49
ESC iXr2 Specify print start received character count	51
ESC iXD2 Specify delimiter	52
ESC iXa2 Specify Non-Printed character text strings	53
ESC iXi2 Specify command mode	54
ESC iXn2 Specify template selection	55
ESC iXf2 Change the prefix character	56
ESC iXm2 Select character code set	57
ESC iXj2 Specify international character set	58
ESC iXR2 Specify line return command text string	59
ESC iXC2 Specify number of copies	60
ESC iXT1 Retrieve select print start trigger items	61
ESC iXP1 Retrieve print start command setting text string	62
ESC iXr1 Retrieve print start received character count	63
ESC iXD1 Retrieve delimiter	64
ESC iXa1 Retrieve Non-Printed character text strings	65
ESC iXi1 Retrieve command mode setting	66
ESC iXn1 Retrieve template selection number	67
ESC iXm1 Retrieve character code set	68
ESC iXj1 Retrieve international character set setting	69
ESC iXf1 Retrieve the prefix character	70
ESC iXR1 Retrieve line return command setting text string	71
ESC iXC1 Retrieve number of copies	72
Character code	73

Brother International PJ-663 P-touch Template Manual/ Command Reference - Page 16

Gs1-128 Ucc/ean-128/code128

Page 16 highlights