Brother International PJ-763MFi Users Guide - Page 2
Use the Rechargeable Li-ion Battery, Optional - driver
![]() |
View all Brother International PJ-763MFi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Button Functions (Power) button function Operation Turn the printer on Press and hold the button for about one second until the POWER indicator turns on. Turn the printer off Press and hold the button for about one second or press it quickly two times depending on the printer setting (see the Online User's Guide for more information). (Feed) button function Operation Feed paper Load the paper and press the button to feed the paper. Print the printer settings To print the printer settings without connecting the printer to a computer or mobile device: 1 Turn the printer on and make sure no paper is loaded. 2 Press and hold the button until the DATA indicator lights in red. 3 Load paper. (Bluetooth) button function (PJ-762/PJ-763/PJ-763MFi Operation only) Enable/disable the Bluetooth function Press and hold the button for one second to enable or disable the Bluetooth function of the printer. (Wi-Fi) button function (PJ-773 only) Enable/disable the Wi-Fi function Use WPS to configure Wi-Fi settings easily Operation Press and hold the button for one second to enable or disable the Wi-Fi function of the printer. Press and hold the button for about five seconds to configure the Wi-Fi settings using WPS. Use the Rechargeable Li-ion Battery (Optional) Installing the Rechargeable Li-ion Battery 1. Move battery latch 1 to the unlock position. 2. While holding battery latch 2 in the unlock position, remove the battery cavity mounting block. 1 2 3 1 Battery latch 1 2 Battery latch 2 3 Battery cavity mounting block 3. Release battery latch 2. Battery latch 2 moves back to the lock position. 4. Insert the battery into the battery cavity until it locks into place. 4 5 4 Battery cavity 5 Rechargeable Li-ion battery 5. Move battery latch 1 to the lock position. Removing the Rechargeable Li-ion Battery 1. Move the battery latches to the unlock position, and then remove the battery. 1 1 Battery latches 2. Insert the battery cavity mounting block into the battery cavity until it locks into place. 3. Move battery latch 1 to the lock position. Charging the Rechargeable Li-ion Battery NOTE • Charge the battery immediately after purchase using the following procedure. • Up to three hours are needed to fully charge the rechargeable Li-ion battery. When fully charged, the battery will print about 600 pages. 1. Turn the printer off and install the battery. 2. Use the AC adapter and AC power cord to connect the printer to an AC power outlet, or use the car adapter to connect the printer to a DC power outlet. 12 1 POWER indicator 2 STATUS indicator 3. When the battery is fully charged, the STATUS indicator turns off. Disconnect the AC adapter or car adapter from the DC connector. Stopping Rechargeable Li-ion Battery Charging To stop the battery charging, disconnect the AC adapter or car adapter from the DC connector. Notes on Using the Rechargeable Li-ion Battery Fully charge the battery before use. Do not use it before it is fully charged. High density (dark) printing discharges the battery faster than low density printing. Adjust the print density setting in the printer driver's dialog box or Printer Setting Tool (see the Online User's Guide). The battery charging must take place in 32°F - 104°F (0°C - 40°C) environments, otherwise the battery will not be charged, and the STATUS indicator will remain lit. If you use the printer when both the battery is installed and the AC adapter or car adapter is connected, the STATUS indicator may turn off and charging may stop even if the battery has not been fully charged. Rechargeable Li-ion Battery Characteristics To ensure the highest performance and longest life from your the battery: Do not use or store the battery in a location exposed to extreme high or low temperatures as it may discharge more quickly. This may happen when using a rechargeable Li-ion battery with a high charge (charged 90% or more) in a location exposed to high temperatures. Remove the battery when storing the printer for long periods of time. Store batteries with less than a 50% charge in a cool dry place out of direct sunlight. Recharge the battery every six months if it is stored for long periods of time.
![](/manual_guide/products/brother-international-pj722-users-guide-0965b94/2.png)