Brother International PQ-1500 Users Manual - English - Page 13

CONTENTS Accessories Names of Parts Threading (2) Note Please turn power is off before using automatic needle threader. Accidentally stepping on the foot controller during this operation could cause bodily injury or damage to the machine. Upper Threading 1 7 6 8 4 2 3 5 1 6 7 2 4 3 5 8 9 0 A 9 0 A Using the Automatic Needle Threader q Make sure thread take-up lever is in highest position and presser foot is up. V When using polyester thread or thread that tangles or breaks, run the thread through all three holes of the thread guide. V If the thread is still tangles or breaks, run the thread through the holes backwards as shown in diagram. Before You Begin Changing Needles and Light Bulb Threading Stitch Samples and Changing Needle Chart Presser Feet Basic Sewing Caring for Your Machine Automatic Needle Threader Thread Pin Hook 1 Pull hand wheel towards you until needle is in 3 Lower automatic needle threader. 4 Catch thread with hook. 5 Turn the hook and raise needle the highest position, and lower presser foot. V Pull thread along the right side of the pin. threader lever while gently holding 2 Take thread in your left hand, and V Do not force the needle threader lower than the V Pull thread to the right, and make the end of the thread. gently pull it forwards. eye of the needle which is in the highest position. sure it has been caught with the hook. 9 Trouble Shooting