Brother International PR650e Operation Manual Addendum - Page 10
Disabling the Link function
View all Brother International PR650e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
To open another pattern sent from the b computer, touch , and then repeat the procedure starting from step 8 to continue embroidering. • To stop embroidering or to embroider the same pattern again, touch . Note ● The embroidering screen settings specified in step 0 are saved even if was touched to continue sewing after embroidering is finished. Disabling the Link function Touch , and then touch and 1 to display page 5 of the machine settings screen. Touch 2 to disable the Link function. X When the following message appears, touch . Memo ● If the embroidery machine is turned off while it is embroidering, the resume operation can be used the next time it is turned on. Turn off the machine. 3 9
9
b
To open another pattern sent from the
computer, touch
, and then repeat the
procedure starting from step
8
to continue
embroidering.
• To stop embroidering or to embroider the
same pattern again, touch
.
Note
●
The embroidering screen settings specified
in step
0
are saved even if
was
touched to continue sewing after
embroidering is finished.
Memo
●
If the embroidery machine is turned off
while it is embroidering, the resume
operation can be used the next time it is
turned on.
Disabling the Link function
1
Touch
, and then touch
and
to display page 5 of the machine settings
screen.
2
Touch
to disable the Link function.
When the following message appears,
touch
.
3
Turn off the machine.