Brother International PS-1250 Accessory Catalog - Page 38
Pearls and Sequins Foot, Taping Foot, Piping Foot
View all Brother International PS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Brother Serger/ Overlock Feet 73 Pearls and Sequins Foot SA211, XB0537-001 XB0537-001 is for 1034D, and SA211 is for the other models. Pearls and Sequins Foot Attaches threaded pearls or beads on the edge of fabric. Can be used for string of 3 to 4 mm pearls and beads. 1. Retract the knife on your machine. 2. Set the machine setting: 3 thread overlock, stitch length to pearl size, stitch width to 3 mm from 5 mm, and adjust the tension. 3. Fold the fabric. 4. Align the edge of the fabric to the guide on the front of the foot. 5. Adjust the guide so that the needle moves down at the position of 1 to 1.5 mm from the folded edge. 6. Place the strings of pearls/beads onto the tunnel and then sew. SA210 Party Bag SA212 Piping Foot Taping Foot Brother Serger/ Overlock Feet 74 Piping Foot Sews piping tapes with two pieces of fabric together. Ideal for edge decoration of bags, cushions, etc. 1. Set the machine setting: 3 thread overlock, stitch width at 5 mm, or 4 thread overlock, stitch width at 3 mm, stitch length to 3. 2. Place two fabrics inside out together and insert the piping tape between them. 3. Align them and set the core of the piping tape into the groove under the piping foot. 4. Sew and then open the fabrics. Taping Foot Attaches tapes and elastic to stretch fabrics. 1. Set the machine setting: 3/4 thread overlock, stitch length to 3 - 4mm for tape attaching, 4 - 5mm for elastic tape attaching. 2. Place the tape/elastic tape into the tape guide and then under the foot. 3. Sew. Note: When the fabrics gather, tighten the thread tension. www.brother.com