Brother International PS-2500 Users Manual - English - Page 79
Correcting a Problem with, the Automatic Thread Cutter
View all Brother International PS-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
MAINTENANCE MANTENIMIENTO (Model PS-2500, STAR140E) Correcting a Problem with the Automatic Thread Cutter CAUTION: Be sure to unplug the power supply cord in order to reduce the risk of injuries or electric shock. 1. Turn off the main power supply. 2. Raise the Presser Foot Lever and slightly turn the hand wheel either toward or away from you so that the tangled thread and the fabric can be removed. 1 Hand wheel 3. Turn the hand wheel toward you to raise the thread take-up to its highest position. If the bobbin holder has moved over the bobbin, move it to the left. 2 Bobbin holder 4. Remove the bobbin, then feed the lower thread again from the beginning. (Modelo PS-2500, STAR140E) Corrección de problemas en el cortahilos automático PRECAUCIÓN: Asegúrese de que el cable de corriente está desconectado, para reducir el riesgo de lesiones o calambres. 1. Apague el interruptor principal. 2. Levante la palanca del prensatelas y gire ligeramente la rueda manual hacia ambos lados para retirar el hilo enredado y el tejido. 1 Rueda manual 3. Gire la rueda manual en dirección a usted para levantar el tirahilos hasta su posición más elevada. Si el soporte de la canilla se ha colocado encima de la canilla, desplácelo a la izquierda. 2 Soporte de la canilla 4. Retire la canilla y cargue de nuevo el hilo inferior desde el principio. 2 1 If the threads become tangled again or cannot be cut with the automatic thread cutter, even after performing the operation explained above, it may be possible that the threads are tangled under the needle plate. Clean the needle plate and shuttle as explained below. Si tras realizar la operación anterior vuelven a enredarse los hilos o si no puede cortarlos con el cortahilos automático, ello puede deberse a que los hilos están enredados debajo de la placa de agujas. Limpie la placa de agujas y la lanzadera tal como se explica a continuación. 73