Home » Brother International Manuals » Printers » Brother International PT-2310 » Manual Viewer

Brother International PT-2310 Users Manual - English and Spanish - Page 14

To Install the USB Printer Driver - pt user guide

UPC - 012502600442

View all Brother International PT-2310 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

1) Select which options to install. Editor: The P-touch Editor Version 3.1 software Clip Art: The illustrations for the P-touch Editor Version 3.1 Clip Art function Fonts: The 13 fonts Auto Format Templates: The templates for the Auto Format function User's Guide: The User's Guide (HTML) for the P-touch Editor Version 3.1 (The User's Guide can also be viewed from the CD-ROM.) Help: The help files for P-touch Editor Version 3.1 If the Change button can be clicked while an option is selected, sub-components can be selected. Click the Change button to display the Select Sub-components dialog box, and then select the sub-components that you wish to install by putting a check mark beside them. If certain options or sub-components are not installed, some P-touch Editor functions may not be available. After selecting the desired sub-components, click the Continue button. 2) Click the Next button to begin installation. 8 After P-touch Editor is installed, a dialog box appears, allowing you to select whether or not to install the printer driver. To install the printer driver, click the Yes button. The first Driver Setup dialog box appears, informing you that the PT-2300/2310 printer driver will be installed. Continue with the procedure in "To install the USB printer driver " below. If the printer driver is already installed, click the No button, restart the computer, and then remove the CD-ROM from the CD-ROM drive. To Install the USB Printer Driver: With Plug-and-Play, new devices connected to the system are detected, and their drivers are automatically installed. If the PT-2300/2310 is to be connected through the USB port, its driver will be installed with Plug-and-Play. Be sure to read the installation instructions described below before installing the file supplied on the CD-ROM. Do not connect the P-touch 2300/2310 to the computer until you are instructed to do so, otherwise the PT-2300/2310 printer driver may not be installed correctly. 10

Section	Page
CONTENTS	2
Getting Started	2
For Your Information	2
GENERAL DESCRIPTION	5
TOP VIEW	5
BOTTOM VIEW	5
KEYBOARD & LCD DISPLAY	6
GENERAL PRECAUTIONS	6
BATTERIES	7
1 Remove the battery compartment cover on the back of the machine.	7
2 If batteries are already installed, remove them.	7
3 Insert eight new AA alkaline batteries, making sure that their poles point in the correct direc...	7
4 Attach the battery compartment cover.	7
OPTIONAL AC ADAPTOR	8
1 Insert the plug on the adaptor cord into the connector marked DC IN 9.5V on the right side of t...	8
2 Insert the plug on the adaptor into the nearest standard electrical outlet.	8
TAPE CASSETTE	9
1 Lift open the tape compartment cover. The installed cassette is also released.	9
2 If a tape cassette is already installed, remove it by pulling it straight up.	9
3 If the ink ribbon in the other tape cassette is loose, use your finger to wind the toothed whee...	9
4 Insert the tape cassette firmly into the tape compartment, making sure that the entire back of ...	9
5 Close the compartment cover, then turn on the machine if it is off.	9
6 Hold down c and press _ once to advance the tape and remove any slack.	9
CONNECTING THE P-TOUCH TO A COMPUTER	10
1 Insert the flat (A) connector on the USB cable into the USB port on the computer.	10
2 Insert the square (B) connector on the USB cable into the USB port on the right side of the P-t...	10
3 Turn on the P-touch.	10
INSTALLING P-TOUCH EDITOR	11
On an IBM PC-Compatible Computer	11
1 Check that your system configuration meets the following requirements.	11
2 Insert the P-touch Editor Version 3.1 CD- ROM into the computer’s CD-ROM drive. A dialog box au...	11
3 Click the top button (P-touch Editor). The InstallShield® Wizard for installing the P-touch Edi...	12
4 Carefully read the contents of the dialog box, and then click the Next button to continue. The ...	12
5 Type the necessary information into the appropriate boxes (If the information has already been ...	12
6 Click the Yes button to register the entered information. The Setup Type dialog box appears.	13
7 Select the installation method, and then click the Next button.	13
8 After P-touch Editor is installed, a dialog box appears, allowing you to select whether or not ...	14
1 Click the Next button. A dialog box appears, instructing you to connect the PT-2300/2310 to the...	15
2 Connect the PT-2300/2310 to the computer using a USB interface cable as described on page6, an...	15
3 Click the Finish button. A dialog box appears, showing that the installation is finished.	15
4 Select “Yes, I want to restart my computer now.”, click the Finish button to restart the comput...	15
1 In the dialog box that appears, informing you that the PT-2300/2310 printer driver will be inst...	16
2 After the dialog box appears, instructing you to connect the P-touch 2300/2310 and turn it on, ...	16
3 In the first Found New Hardware Wizard dialog box that appears, select “Install the software au...	16
4 If a dialog box warning appears indicating that the software has not passed Windows Logo testin...	16
5 In the Found New Hardware Wizard dialog box that appears, indicating that installation of the P...	17
6 In the dialog box that appears, indicating that installation is finished, select “Yes, restart ...	17
7 Remove the CD-ROM from the computer.	17
1 Start up Windows Explorer.	17
2 Select the CD-ROM drive.	17
3 Double-click “Main.htm” in the Manual folder within the P-touch folder on the CD- ROM.	17
1 Click the Start button in the taskbar to display the Start menu.	17
2 Select “Programs”.	17
3 Select “P-touch Editor 3.1”.	17
4 Click “The User’s Guide P-touch Editor Ver 3.1”.	17
1 Turn off the PT-2300/2310, and then disconnect it from the computer.	18
2 Insert the P-touch Editor Version 3.1 CD-ROM into the computer’s CD-ROM drive. A dialog box aut...	18
3 Click the bottom button (Printer driver). A Driver Setup dialog box appears, allowing you to se...	18
4 Select the desired operation, and then click the Next button.	18
5 If “Replace with new Brother PT-2300/ 2310” or “Add Brother PT-2300/2310” was selected: With Wi...	18
On a Macintosh Computer	21
1 Check that your system configuration meets the following requirements.	21
2 Connect the PT-2300/2310 to the Macintosh using a USB interface cable. Be sure to leave the PT-...	21
3 Turn on the Macintosh.	21
4 Insert the P-touch Editor Version 3.1 CD-ROM into the computer’s CD-ROM drive.	21
5 Double-click the P-touch Editor 3.1 Installer icon in the folder that appears.	21
6 After the installer starts up, select the installation method.	21
7 When the installation is finished and the following dialog box appears, click the Quit button.	22
8 When the dialog box appears, asking if you wish to restart the computer, click the Restart butt...	22
1 Turn on the PT-2300/2310.	23
2 Pull down the Apple menu and select “Chooser” to display the Chooser window.	23
3 In the list on the left, click the PT-2300/ 2310 icon. Then, select the appropriate printer fro...	23
4 Close the Chooser window to confirm your settings.	23
1 Drag the P-touch Editor Ver 3.1 folder to the Trash icon.	23
2 In the System Folder, open the Extensions folder.	23
3 Drag the PT-2300/2310 icon and the USB PT-2300/2310 Extension icon to the Trash icon.	23
4 In the System Folder, open the Preferences folder.	23
5 Drag the PT-2300/2310 Prefs icon to the Trash icon.	23
STARTING P-TOUCH EDITOR	24
On an IBM PC-Compatible Computer	24
1 Click the Start button in the taskbar to display the Start menu.	24
2 Select “Programs”.	24
3 Select “P-touch Editor 3.1”.	24
4 Click “P-touch Editor 3.1”.	24
1 Start up Windows Explorer.	24
2 Select the drive and directory where P-touch Editor is installed.	24
3 Double-click “Ptedit3.exe”.	24
On a Macintosh Computer	25
1 Click (Text button) on the draw toolbar. Text can be typed in, and the pointer changes from (se...	26
2 Move the I-beam pointer to the position in the layout area where you wish to type in text, and ...	26
3 The cursor flashes in the layout area to indicate that you can now type in text.	26
4 Use the computer keyboard to type in the text.	26
5 To create a new line of text, press the keyboard’s Enter key.	26
Notes on Usage	27
ATTACHING LABELS	28
1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick in your...	28
2 Pass the tape halfway through the long narrow hole in the stick.	28
3 Turn the stick three-quarters of a turn towards you and pull the stick away from you as shown b...	28
4 Peel off the label backing.	28
PRINT HEAD & ROLLERS	29
1 Turn off the machine.	29
2 Open the tape compartment cover, then remove the tape cassette if one is installed. The print h...	29
3 Print head: Use a dry cotton swab to gently wipe the print head with an up-and-down motion. Rol...	29
4 Install a tape cassette, close the tape compartment cover, and then try printing again.	29
5 If a blank streak still appears in the label, repeat steps 3 and 4 using a cotton swab dipped i...	29
POWER KEY	30
CURSOR KEYS	30
CODE, ALT & SHIFT KEYS	31
1 Hold down c and press s. The Caps indicator on the left side of the display comes on.	33
2 Press the keys of the desired letters or symbols.	33
3 To exit Caps mode, hold down c and press s. The Caps indicator goes off.	33
SPACE KEY	34
RETURN KEY	34
TAB FUNCTION	35
1 Hold down c and press W once. The current tab length is displayed.	36
2 Press h or e until the desired length is displayed or use the number keys to type in the length.	36
3 Press r.	36
1 Hold down c and press W once.	36
2 Press e until 1.0 is displayed.	37
3 Press r.	37
DELETE KEY	37
1 Press f, w, h or e to position the cursor below the character immediately to the right of the c...	37
2 Press * once.	37
1 Press f, w, h or e to position the cursor below the character immediately to the right of the l...	38
2 Hold down * until all of the characters that you wish to delete are deleted.	38
LINE OUT FUNCTION	38
1 Press f, w, h or e to position the cursor within the line of text that you wish to delete.	38
2 Hold down c and press 0 once.	38
CLEAR FUNCTION	39
1 Hold down c and press *.	39
2 Press h or e until TXT&FORMAT is selected (flashing).	39
3 Press r.	39
1 Hold down c and press *.	39
2 Press h until TXT&FORMAT is flashing.	39
3 Press r.	39
1 Hold down c and press *.	40
2 Press h or e until TEXT ONLY is selected (flashing).	40
3 Press r.	40
1 Hold down c and press *.	40
2 Press e until TEXT ONLY is flashing.	40
3 Press r.	40
ACCENT FUNCTION	41
1 Hold down c and press A. The message “ACCENT a – u / A – U?” appears on the display.	41
2 Press the key of the letter in the desired accented character.	41
3 Press f or w until the desired accented character appears enlarged within the frame in the midd...	41
4 Press r. The accented character is added to the text.	41
1 Hold down c and press A.	42
2 Hold down s and press E.	42
3 Press w until É appears in the frame.	42
4 Press r.	42
SYMBOL FUNCTION	42
1 Hold down c and press a. A row of symbols appear in the display.	43
2 Press h or e to display different rows of symbols and press f or w until the desired symbol app...	43
3 Press r. The symbol is added to the text.	43
1 Hold down c and press a.	43
2 Press h or e until the row containing “” appears, then press f or w until “” appears in the frame.	43
3 Press r.	44
AUTO FORMAT FUNCTION	44
1 Hold down c and press Y once. The currently selected setting appears in the display.	45
2 Press h or e to select the desired setting.	45
3 Press r to apply the selected setting.	45
1 Hold down c and press Y.	45
2 Press h or e until the AUDIO CASSETTE setting is displayed.	45
3 Press r.	45
STAMP FUNCTION	45
1 Type in the text, and then insert a medium (3/4” (18-mm)-wide) or a large (1” (24-mm)- wide) st...	45
2 Hold down c and press U once. The message “STAMP FORMAT?” appears in the display.	45
3 Press r. The text is automatically formatted for the installed stamp: centered within the prese...	46
4 Press p to cut the text out of the stamp stencil film.	46
5 After the stamp stencil film is cut off, remove the backing paper from the stamp stencil film a...	46
1 Enter the text and insert a stamp film cassette in the tape compartment.	46
2 Hold down c and press U.	46
3 Press r.	46
4 Press p to engrave the stamp stencil film, and then automatically cut off.	46
5 Remove the stamp frame from around the stamp film holder ink pad, one side at a time, then remo...	46
6 With the glossy side of the stamp stencil film upward, align one of its ends with the slit on t...	46
7 Hold the end of the stamp stencil film in place with your thumb, then pass the tape through the...	47
8 Fold the other end of the stamp stencil film over the other side of the stamp film holder and h...	47
9 Fit the stamp frame over the stamp stencil film and push it into place.	47
0 Insert the stamp film holder straight into its cap.	47
FONT FUNCTION	48
1 While holding down c, press 1 once, and keep c held down to display the current font setting.	48
2 While still holding down c, continue pressing 1 until the desired font setting is displayed.	48
3 Release c to apply the selected font setting to the entire text.	48
1 While holding down c, press 1 once, and keep c held down.	48
2 While still holding down c, continue pressing 1 until FONT 2 is displayed.	48
3 Release c.	48
SIZE & WIDTH FUNCTIONS	49
1 While holding down c, press 2 once, and keep c held down to display the current size setting.	50
2 While still holding down c, continue pressing 2 until the desired size setting is displayed.	50
3 Release c to apply the selected size setting to the entire text.	50
1 While holding down c, press 2 once, and keep c held down.	50
2 While still holding down c, continue pressing 2 until 24 is displayed.	50
3 Release c.	50
1 While holding down c, press 3 once, and keep c held down to display the current width setting.	51
2 While still holding down c, continue pressing 3 until the desired width setting is displayed.	51
3 Release c to apply the selected width setting to the entire text.	51
1 While holding down c, press 3 once, and keep c held down.	51
2 While still holding down c, continue pressing 3 until WIDE is displayed.	51
3 Release c.	51
STYLE FUNCTION	51
1 While holding down c, press 4 once, and keep c held down to display the current style setting.	51
2 While still holding down c, continue pressing 4 until the desired style setting is displayed.	52
3 Release c to apply the selected style setting to the entire text.	52
1 While holding down c, press 4 once, and keep c held down.	52
2 While still holding down c, continue pressing 4 until I+SHAD is displayed.	52
3 Release c.	52
UNDERLINE FUNCTION	53
1 While holding down c, press 5 once, and keep c held down to display the current underline setting.	53
2 While still holding down c, continue pressing 5 until the desired underline setting is displayed.	53
3 Release c to apply the selected underline setting to the entire text.	53
1 While holding down c, press 5 once, and keep c held down.	54
2 While still holding down c, continue pressing 5 until UNDL ON is displayed.	54
3 Release c.	54
FRAME FUNCTION	54
1 While holding down c, press 6 once, and keep c held down to display the current frame setting.	54
2 While still holding down c, continue pressing 6 until the desired frame setting is displayed.	55
3 Release c to apply the selected frame setting to the entire text.	55
1 While holding down c, press 6 once, and keep c held down.	55
2 While still holding down c, continue pressing 6 until the candy frame is displayed.	55
3 Release c.	55
TAPE MARGIN FUNCTION	55
1 While holding down c, press E once, and keep c held down to display the current tape margin set...	56
2 While still holding down c, continue pressing E until the desired tape margin setting is displa...	56
3 Release c to apply the selected tape margin setting to the entire text.	56
1 While holding down c, press E once, and keep c held down.	56
2 While still holding down c, continue pressing E until HALF is displayed.	56
3 Release c.	56
HORIZONTAL ALIGNMENT FUNCTION	56
1 While holding down c, press R once, and keep c held down to display the current horizontal alig...	57
2 While still holding down c, continue pressing R until the desired horizontal alignment setting ...	57
3 Release c to apply the selected horizontal alignment setting to the entire text.	57
1 While holding down c, press R once, and keep c held down.	57
2 While still holding down c, continue pressing R until RIGHT is displayed.	57
3 Release c.	57
MIRROR PRINTING FUNCTION	57
1 While holding down c, press p once, and keep c held down to display the current mirror printing...	58
2 While still holding down c, continue pressing p until the desired mirror printing setting is di...	58
3 Release c to apply the selected mirror printing setting to the entire text.	58
1 While holding down c, press p once, and keep c held down.	58
2 While still holding down c, continue pressing p until ON is displayed.	58
3 Release c.	58
LENGTH FUNCTION	58
1 While holding down c, press T once, and keep c held down to display the current length of the l...	59
2 While still holding down c, continue pressing T until the desired label length setting is displ...	59
3 Release c. If ON was selected, the current label length setting is displayed.	59
4 Press h or e to select the desired length or use the number keys to enter a length.	59
5 Press r.	59
1 While holding down c, press T once, and keep c held down.	59
2 While still holding down c, continue pressing T until ON is displayed.	59
3 Release c.	59
4 Press h until 5.0inch is displayed.	60
5 Press r.	60
AUTO CUT FUNCTION	60
1 While holding down c, press Z once, and keep c held down to display the current auto cut setting.	60
2 While still holding down c, continue pressing Z until the desired auto cut setting is displayed.	60
3 Release c to apply the selected auto cut setting.	60
1 While holding down c, press Z once, and keep c held down.	60
2 While still holding down c, continue pressing Z until ON is displayed.	61
3 Release c.	61
PRINT KEY	61
FEED & CUT FUNCTION	61
NUMBERING FUNCTION	62
1 Press f, w, h or e to position the cursor below the number that you wish to increase.	62
2 Hold down c and press O. The message “NUMBER UNTIL” appears in the display with the current set...	62
3 Press a number key between 1 and 9 (or press h or e) to select the last number that is to be pr...	62
4 Press p (or r) to begin printing the labels. The number of each copy is displayed while it is b...	62
1 Position the cursor below “1”.	62
2 Hold down c and press O.	62
3 Press 3.	63
4 Press p (or r).	63
REPEAT PRINTING FUNCTION	63
1 Hold down c and press I. The message “COPIES” appears in the display with the current setting.	63
2 Press a number key between 1 and 9 (or press h or e) to select the number of copies that are to...	63
3 Press p (or r) to begin printing the labels. The number of each copy is displayed while it is ...	64
1 Hold down c and press I.	64
2 Press 3.	64
3 Press p (or r).	64
MEMORY FUNCTIONS	65
1 Hold down c and press 7. The message “STORE” appears on the display with the currently selected...	65
2 Press a number key (or press h or e) to select the file number where you wish to store the text.	65
3 Press r. The text is stored under the selected file number and the text previously shown in the...	65
1 Hold down c and press 8. The message “RECALL” appears on the display with the file number and b...	66
2 Press a number key (or press h or e) to select the file number containing the text that you wis...	66
3 Press r. Any text previously entered in the display is erased and the text stored under the sel...	66
1 Hold down c and press 9. The message “CLEAR” appears on the display with the file number and be...	66
2 Press a number key (or press h or e) to select the file number containing the text that you wis...	66
3 Press r. The message “OK TO CLEAR?” appears.	66
4 Press r to delete the text file that was selected.	66
1 Hold down c and press 7.	67
2 Press 4.	67
3 Press r.	67
1 Hold down c and press 8.	67
2 Press 1.	67
3 Press r.	67
1 Hold down c and press 9.	68
2 Press 4.	68
3 Press r.	68
4 Press r.	68
TROUBLESHOOTING	69
ERROR MESSAGE LIST	70
SPECIFICATIONS	73
ACCESSORIES (For USA Only)	74
PT-2300/2310 CONTACT INFORMATION (For USA Only)	78
Service Center Locations	78
Operational Assistance	78
Assistance on the Internet	78
Accessories and Supplies	78
Fax-Back System	78
P-TOUCH ACCESSORY ORDER FORM (For USA Only)	79
PT-2300/2310 CONTACT INFORMATION (For USA Only)	80
Service Center Locations	80
Operational Assistance	80
Assistance on the Internet	80
Accessories and Supplies	80
Fax-Back System	80
P-TOUCH ACCESSORY ORDER FORM (For USA Only)	81
PT-2300BOOKES.pdf	83
ÍNDICE	84
Cabezal de impresión	109
Cabezal de impresión	109
CABEZA DE IMPRESIÓN Y RODILLOS	109
De vez en cuando, el polvo se adhieren al cabezal de impresión y a los rodillos del el equipo. Su...	109
Por lo tanto, al igual que con las grabadoras de cintas, la cabeza del equipo deberá limpiarse de...	109
1 Desconecte la alimentación del equipo.	109
2 Abra la cubierta del compartimiento de la cinta, extraiga el casete, si está dentro. La cabeza ...	109
3 Cabezal de impresión: Emplee un palillo con punta de algodón seco para frotar con cuidado la ca...	109
4 Instale un casete de cinta, cierre la cubierta del compartimiento de la cinta, y después pruebe...	109
5 Si todavía aparece una franja en blanco en la etiqueta, repita los pasos 3 y 4 utilizando un pa...	109
Si no funciona nada de lo de arriba, póngase en contacto con el representante de servicio.	109
TECLA DEL CURSOR	110
TECLAS CODE, ALT Y SHIFT	111
1 Mantenga presionado c y presione s. El indicador de Caps, de la izquierda del visualizador, se ...	111
TECLA DE RETORNO	112
TABULACIÓN	113
1 Mantenga pulsada c y presione W una vez. Se visualizará la longitud de tabulación actual.	113
2 Presione h o e hasta que se visualice la longitud deseada, o utilice las teclas numéricas para ...	113
3 Presione r.	113
TECLA DE BORRADO (DEL)	114
1 Presione f, w, h o e para situar el cursor debajo del carácter que está inmediatamente a la der...	114
2 Presione * una vez.	114
1 Presione f, w, h o e para situar el cursor debajo del carácter que está inmediatamente a la der...	114
2 Mantenga presionado * hasta que se hayan borrado todos los caracteres que usted deseaba borrar.	114
FUNCIÓN DE BORRADO DE LÍNEA (LINE OUT)	115
1 Presione f, w, h o e para situar el cursor dentro de la línea del texto que usted desee borrar.	115
2 Mantenga presionado c y presione 0 una vez.	115
FUNCIÓN DE REPOSICIÓN (CLEAR)	115
1 Mantenga presionado c y presione *.	115
2 Presione h o e hasta que se seleccione TXT&FORMAT (parpadeando).	115
3 Presione r.	115
FUNCIÓN DE ACENTOS	116
1 Mantenga presionado c y presione A. Aparecerá el mensaje “ACCENT a - u / A - U?” en el visualiz...	116
2 Presione la tecla de la letra acentuada deseada.	116
3 Presione f o w hasta que aparezca el carácter acentuado deseado ampliado dentro del recuadro en...	116
4 Presione r. El carácter acentuado será añadido al texto.	116
FUNCIÓN DE SÍMBOLOS	117
1 Mantenga presionado c y presione a. Aparecerá una fila símbolos en el visualizador.	117
2 Presione h o e para visualizar diferentes filas de símbolos y presione f o w hasta que aparezca...	117
3 Presione r. El símbolo será añadido al texto.	117
FUNCIÓN DE FORMATO AUTOMÁTICO	118
1 Mantenga pulsada c y presione una vez Y. El ajuste actualmente seleccionado parecerá en el visu...	118
2 Pulse h o e para seleccionar el ajuste deseado.	118
3 Presione r para aplicar el ajuste seleccionado.	118
FUNCIÓN DE SELLOS	119
1 Escriba el texto, y después inserte un casete de película de membretes de tamaño medio (3/4” (1...	119
2 Mantenga presionado c y presione U una vez. Aparecerá el mensaje “STAMP FORMAT?” en el visualiz...	119
3 Presione r. El texto se formateará automáticamente para el membrete instalado: centrado dentro ...	119
4 Presione p para separar el texto del cliché de membrete.	119
5 Después de haber cortado la película matriz de sellos, extraiga el papel del dorso del cliché d...	119
1 Extraiga el marco del membrete de entorno al lado al tampón de tinta del soporte de películas d...	119
2 Con el lado brillante del cliché del membrete encarado hacia arriba, alinee uno de sus extremos...	119
3 Retenga el extremo del cliché del membrete en su lugar con el dedo pulgar, y pase la cinta por ...	119
4 Pliegue el otro extremo del cliché del membrete por en otro lado del soporte de películas de me...	119
5 Adapte el marco del membrete encima del cliché del membrete y presiónelo a su lugar.	119
6 Inserte el soporte de películas de membrete recto en su tapa.	119
FUNCIÓN DEL TIPO DE CARACTERES	120
2 Siguiendo manteniendo presionada c, continúe presionando 1 hasta que se visualice el tipo de ca...	120
3 Para aplicar el ajuste de tipo de caracteres seleccionado a todo el texto, suelte c.	120
FUNCIONES DE TAMAÑO Y DE ANCHURA	120
1 Manteniendo presionada c, pulse una vez 2, y mantenga presionada c para hacer que se visualice ...	121
2 Siguiendo manteniendo presionada c, continúe presionando 2 hasta que se visualice el tamaño act...	121
3 Para aplicar el ajuste de tamaño seleccionado a todo el texto, suelte c.	121
1 Manteniendo presionada c, pulse una vez 3, y mantenga presionada c para hacer que se visualice ...	121
2 Siguiendo manteniendo presionada c, continúe presionando 3 hasta que se visualice el ancho actu...	121
3 Para aplicar el ajuste de ancho seleccionado a todo el texto, suelte c.	121
FUNCIÓN DE ESTILO	122
1 Manteniendo presionada c, pulse una vez 4, y mantenga presionada c para hacer que se visualice ...	122
2 Siguiendo manteniendo presionada c, continúe presionando 4 hasta que se visualice el estilo act...	122
3 Para aplicar el ajuste de estilo seleccionado a todo el texto, suelte c.	122
FUNCIÓN DE SUBRAYADO	122
1 Manteniendo presionada c, pulse una vez 5, y mantenga presionada c para hacer que se visualice ...	123
2 Siguiendo manteniendo presionada c, continúe presionando 5 hasta que se visualice el subrayado ...	123
3 Para aplicar el ajuste de subrayado seleccionado a todo el texto, suelte c.	123
FUNCIÓN DE MARCOS	123
1 Manteniendo presionada c, pulse una vez 6, y mantenga presionada c para hacer que se visualice ...	123
2 Siguiendo manteniendo presionada c, continúe presionando 6 hasta que se visualice el marco actu...	123
3 Para aplicar el ajuste de marco seleccionado a todo el texto, suelte c.	123
FUNCIÓN DE CINTA	124
1 Manteniendo presionada c, pulse una vez E, y mantenga presionada c para hacer que se visualice ...	124
2 Siguiendo manteniendo presionada c, continúe presionando E hasta que se visualice la cinta actu...	124
3 Para aplicar el ajuste de la cinta seleccionado a todo el texto, suelte c.	124
FUNCIÓN DE LA ALINEACIÓN HORIZONTAL	124
1 Manteniendo presionada c, pulse una vez R, y mantenga presionada c para hacer que se visualice ...	125
2 Siguiendo manteniendo presionada c, continúe presionando R hasta que se visualice la alineación...	125
3 Para aplicar el ajuste de la alineación seleccionado a todo el texto, suelte c.	125
FUNCIÓN DE IMPRESIÓN EN MODO ESPEJO	125
1 Manteniendo presionada c, pulse una vez p, y mantenga presionada c para hacer que se visualice ...	125
2 Siguiendo manteniendo presionada c, continúe presionando p hasta que se visualice la impresión ...	125
3 Para aplicar el ajuste de la impresión en modo espejo seleccionado a todo el texto, suelte c.	125
FUNCTIÓN DE LONGITUD	126
1 Manteniendo presionada c, presione una vez T, y mantenga presionada c hasta que se visualice br...	126
2 Manteniendo presionada c, continúe presionando T hasta que se visualice el ajuste de longitud d...	126
3 Suelte c. Si había seleccionado ON, se visualizará la longitud actual de la etiqueta.	126
4 Presione h o e para seleccionar la longitud deseada, o utilice las teclas numéricas para introd...	126
5 Presione r.	126
FUNCIÓN DE CORTE AUTOMÁTICO	127
1 Mientras mantiene presionada c, presione una vez Z y mantenga presionada c para visualizar al a...	127
2 Mientras mantiene presionada c, continúe presionando Z hasta que se visualice el ajuste de cort...	127
3 Suelte c para aplicar el ajuste de corte automático seleccionado.	127
TECLA DE IMPRESIÓN	127
FUNCIÓN DE AVANCE Y CORTE	127
FUNCIÓN DE NUMERACIÓN	128
1 Presione f, w, h, o e para colocar el cursor debajo del número que desee aumentar.	128
2 Mantenga presionada c y presione O. En el visualizador aparecerá el mensaje “NUMBER UNTIL” con ...	128
3 Presione una tecla numérica entre 1 y 9 (o presione h o e) para seleccionar el último número a ...	128
4 Para comenzar la impresión de etiquetas, presione p (o r ). El número de cada copia se visualiz...	128
FUNCIÓN DE IMPRESIÓN REPETIDA	128
1 Mantenga presionada c y presione I. En el visualizador aparecerá el mensaje “COPIES” con el aju...	128
2 Presione una tecla numérica entre 1 y 9 (o presione h o e) para seleccionar el número de copias...	128
3 Presione p (o r) para empezar a imprimir las etiquetas. Se visualizará el número de cada copia...	128
FUNCIONES DE LA MEMORIA	129
1 Mantenga presionada c y presione 7. En el visualizador aparecerá el mensaje “STORE” con el núme...	129
2 Presione una tecla numérica (o presione h o e) para seleccionar el número de archivo donde quie...	129
3 Presione r. El texto se almacenará en el número de archivo seleccionado y volverá a aparecer en...	129
1 Mantenga presionada c y presione 8. En el visualizador aparecerá el mensaje “RECALL” con el núm...	130
2 Presione una tecla numérica (o presione h o e) para seleccionar el número de archivo que conten...	130
3 Presione r. Cualquier texto previamente introducido se borrará y el texto introducido en el núm...	130
1 Mantenga presionada c y presione 9. En el visualizador aparecerá el mensaje “CLEAR” con el núme...	130
2 Presione una tecla numérica (o presione h o e) para seleccionar el número de archivo que conten...	130
3 Presione r. Aparecerá el mensaje “OK TO CLEAR?”.	130
4 Para borrar el archivo de texto seleccionado, presione r.	130
SOLUCIÓN DE PROBLEMAS	131
LISTA DE MENSAJES DE ERROR	132
ESPECIFICACIONES	135
ACCESORIOS (Sólo para EE.UU.)	136
INFORMACIÓN PARA CONTACTAR CON PT-2300/2310 (Sólo para EE.UU.)	139
Localización de centros de servicio	139
Asistencia operacional	139
Asistencia por Internet	139
Accesorios y suministros	139
Sistema de contestación por fax	139
Ahorre tiempo – Regístrese en Linea!	139
No pierda tiempo al teléfono. Despreocúpese por el correo. Visítenos en	139
www.registermybrother.com	139
Regístre su producto inmediatamente en nuestra base y listo.	139
También en su visita, encuentre información útil y participe en sorteos!	139
HOJA DE PEDIDOS DE ACCESORIOS PARA P-TOUCH (Sólo para EE.UU.)	140
INFORMACIÓN PARA CONTACTAR CON PT-2300/2310 (Sólo para EE.UU.)	141
Localización de centros de servicio	141
Asistencia operacional	141
Asistencia por Internet	141
Accesorios y suministros	141
Sistema de contestación por fax	141
Ahorre tiempo – Regístrese en Linea!	141
No pierda tiempo al teléfono. Despreocúpese por el correo. Visítenos en	141
www.registermybrother.com	141
Regístre su producto inmediatamente en nuestra base y listo.	141
También en su visita, encuentre información útil y participe en sorteos!	141