Brother International PT-D450 Users Guide - Page 46
TROUBLESHOOTING, What to do when..., Problem, Solution
View all Brother International PT-D450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
TROUBLESHOOTING What to do when... Problem The screen 'locks', or the P-touch labeler does not respond normally. The display remains blank after turning on the power. The LCD messages are displayed in a foreign language. The label is not printed after pressing the Print key. The label is not printed correctly. The ink ribbon is separated from the ink roller. Solution • Refer to "Resetting the P-touch Labeler" on page 40 and reset the internal memory to the initial settings. If resetting the P-touch labeler does not solve the problem, disconnect the AC adapter and remove the batteries for more than 10 minutes. • Check that the batteries are correctly installed and that the AC adapter designed exclusively for your P-touch labeler is correctly connected. Check that the rechargeable battery is fully charged. • Refer to "Setting Language and Unit" on page 11 to select your desired language. • Check that text has been entered and that the tape cassette is installed correctly with sufficient tape remaining. • If the tape is bent, cut off the bent section and thread the tape through the tape exit slot. • If the tape is jammed, remove the tape cassette and then pull out the jammed tape and cut it. Check that the end of the tape passes through the tape guide before reinstalling the tape cassette. • Remove the tape cassette and reinstall it, pressing it firmly until it clicks into place. • If the print head is dirty, clean it with a cotton swab or optional print head cleaning cassette (TZe-CL4). • If the ink ribbon is broken, replace the tape cassette. If not, leave the tape uncut and remove the tape cassette, then wind the loose ink ribbon onto the spool as shown in the figure. Spool The P-touch labeler stops while printing a label. Label files saved previously are now empty. • Replace the tape cassette if striped tape is visible, as this indicates that you have reached the end of the tape. • Replace all batteries or connect the AC adapter directly to the P-touch labeler. • All files saved in the internal memory are deleted if the batteries are weak or the AC adapter was disconnected. 43 What to do when...