Brother International PocketJet 6 Users Manual - English - Page 32
How to Use PJ-600 Series, Utility - printer drivers
View all Brother International PocketJet 6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Chapter 3 The main window (shown below) opens, and the printer's default settings are displayed. Settings that are specified using the printer driver are used during printing and are saved until the printer is turned off. When the printer is turned on again, the settings specified using PJ-600 Series Utility are used as the default settings. Settings shown here vary by country and may have been specially configured for some customers. How to Use PJ-600 Series Utility 3 a In the main window of the PJ-600 Series Utility, select the check boxes of the parameters with settings that can be changed. b Select the desired settings from the pull-down menus or enter the desired values. c Click [Send Settings] to save the settings in the printer. Note Some parameters can be adjusted using both the printer driver's dialog box and PJ-600 Series Utility. For the following parameters, the setting specified in the printer driver's dialog box has priority. [Paper Size] [Density] ([Print Density]) [Form Feed Mode] [Dash Line Print] 28