Brother International QC-1000 Users Manual - English - Page 150
Upgrading Your Machine's Software
View all Brother International QC-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
UPGRADING YOUR MACHINE'S SOFTWARE UPGRADING YOUR MACHINE'S SOFTWARE You can use a computer to download software upgrades for your sewing machine. When an upgrade program is available on www.brother.com, please download the files following the instructions on the web site and steps below. Note There are two upgrade files. Be sure to download both files successively. Memo • When the machine's software is upgraded, saved combinations of character and decorative stitches are erased. • While the software is being upgraded, the buzzer will not sound when a key is pressed. a While holding the "Presser Foot Lifter" button pressed, turn on the machine. → The following screen appears. d When the screen shown in step a appears again, press . → The message "Saving the upgrade file. Do not turn main power to OFF."appears. The download takes about 3 minutes. Press LOAD after saving the upgrade file in the machine. e When the following screen appears, the first upgrade file is downloaded. Press LOAD after saving the upgrade file in the machine. 6 Appendix b Plug the USB cable connectors into the corresponding USB ports on the computer and on the machine. → The "Removable Disk" icon appears in "My Computer" on the computer. c Copy the upgrade file to "Removable Disk". f Copy the second upgrade file to "Removable Disk". g When the screen shown in step a appears again, press . → The message "Saving the upgrade file. Do not turn main power to OFF."appears. The download takes about 3 minutes. → The message "Connected to PC. Do not disconnect the USB cable." appears. 149