Brother International QL-600 Raster Command Reference - Page 16

Raster Command Reference Descriptions for the numbers in the print data on the previous page are provided in the following table. For details on each command, refer to "4. Printing Command Details". No. Command Name Description １ Invalidate A 200-byte invalidate command is sent. 2 Initialize The "initialize" command is sent. 3 Switch dynamic command mode The printer is switched to raster mode. Send this command before sending raster data to the printer. 4 Job ID setting commands (QL-710W / QL-720NW Only) Internal specification commands Since this is a command for outputting with the commercial version driver, it is unnecessary for the user to send this command. 5 Print information command Media size information for the print data is sent. This is the command for "1.1" × 3.5" (29 mm × 90 mm)" die-cut labels. 6 Various mode (1Bh+69h+4Dh+00H) This is the command for specifying settings such as cut options. Here, "auto cut" is specified. 7 Specify the page number in "cut each * labels" The number of pages printed before automatically cutting is specified. 8 Expanded mode This is the command for specifying expanded functions. Here, "cut at end" is specified. 9 Specify margin amount Since a margin amount cannot be specified with die-cut labels, this command is sent with a margin amount of 0. 10 Select compression mode (QL-710W / QL-720NW Only) TIFF compression mode is selected. 11 Raster data Raster data continues. 12 Print command with feeding Since one page will be printed, this is sent at the end of the first page. 13 Switch dynamic command mode (QL-600 Only) This command resets to default mode that is switched by No.3. Send this command after [Print command with feeding] is sent. - 11 - 2. Print Data