Brother International QL-700 Users Manual - English - Page 5
Label outlet maintenance, by an arrow in the diagram below. - what paper is used in the
View all Brother International QL-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3 4 Remove the backing paper and feed the edge of the cleaning sheet into the printing unit until it reaches the area shown by an arrow in the diagram below. • Insert the sheet without removing the part of the sheet. • Check that the printing surface of the cleaning sheet is facing upwards. 5 Close the DK Roll compartment cover and press the ON/OFF button ( ) to turn the Brother QL-700 on. 6 Press the Feed button for more than one second. The roller spins by 4" (10 cm). The adhesive face of the cleaning sheet removes the stain or dust on the roller. • If you do not press the Feed button for more than one second, the roller spins only 1/3" (8 mm). • Dispose of the cleaning sheet after use. Feed button Label outlet maintenance If a label causes the machine to jam due to glue attached to the label outlet, remove the power cord and clean the label outlet with a cloth dipped into ethanol or isopropyl alcohol. Label outlet