Brother International QL-800 Raster Command Reference - Page 20

Raster Command Reference 60 mm x 86 mm 383 2.3" x 3.4" 62 mm x 29 mm 274 2.4" x 1.1" 62 mm x 100 mm 275 2.4" x 3.9" 12 mm Dia 362 0.47" Dia 24 mm Dia 363 0.94" Dia 58 mm Dia 273 2.2" Dia 60.0 mm 708 dots 62.0 mm 732 dots 62.0 mm 732 dots 12.0 mm 142 dots 24.0 mm 284 dots 58.3 mm 688 dots 86.8 mm 1024 dots 28.9 mm 341 dots 99.8 mm 1179 dots 12.0 mm 142 dots 24.0 mm 284 dots 58.3 mm 688 dots 56.9 mm 672 dots 58.9 mm 696 dots 58.9 mm 696 dots 8.0 mm 94 dots 20.0 mm 236 dots 52.3 mm 618 dots 80.8 mm 954 dots 22.9 mm 271 dots 93.9 mm 1109 dots 8.0 mm 94 dots 20.0 mm 236 dots 52.3 mm 618 dots 1.5 mm 18 dots 1.5 mm 18 dots 1.5 mm 18 dots 2.0 mm 24 dots 2.0 mm 24 dots 3.0 mm 35 dots 3.0 mm 35 dots 3.0 mm 35 dots 3.0 mm 35 dots 2.0 mm 24 dots 2.0 mm 24 dots 3.0 mm 35 dots ID 7 19.64 mm 273 201 dots 8 53.9 mm 636 dots 9 14.0 mm 165 dots 10 47.9 mm 566 dots *1 The number of dots in the table is for 300 dpi; it is difference in the high-resolution mode. *2 Margins of 3 mm (1.5 mm × 2) horizontally and 3 mm (1.5 mm × 2) vertically are added to a diameter of 16 mm. 2.3.3 Feed amount The feed amount (left and right margins) is defined below. Type Minimum Margin Setting Maximum Margin Setting Continuous length tape 3 mm 0.12" 35 dots 127 mm 5" 1500 dots Die-cut labels The length offset indicated in "(b) Die-cut labels" of "2.3.2 Page size" is used. However, set "0" as the value of the "specify margin amount" command. *1 The number of dots in the table is for 300 dpi; it is difference in the high-resolution mode. 2.3.4 Maximum and minimum lengths The maximum and minimum lengths are defined below. Type Minimum Length Continuous length tape 12.7 mm 150 dots Die-cut labels Fixed Maximum Length 1000 mm 11811 dots Fixed *1 The number of dots in the table is for 300 dpi; it is difference in the high-resolution mode. - 16 - 2. Print Data