Brother International Quattro 2 6700D Circular Attachment Instruction Manual - - Page 4
Caution - accessories
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Contents About the Circular Attachment This device can sew circular patterns that graduate out at 5mm intervals, ranging from 30mm to 130mm in radius* when the center needle position is selected. The device is set to the left of the needle on your sewing machine. Utility and decorative stitches can both be sewn using this device. * Radius= Distance from center of circle to any point on the circle. Note • You cannot use any decorative stitch with side feeding, or stitches over 7.0 mm in width. Use fabrics with a thickness of less than 4mm (approx. 3/16"). CAUTION • Special care is required for the pivot pin; Neglectful treatment may cause injury. Young children should be supervised to ensure that they do not play with the attachment. When attachment is not in use, always keep the pivot pin in the indicator to avoid its loss. Included Accessories 1 2 4 5 2 No. Part Name Part Code 1 Circular Attachment - a Indicator b Handle/Flips Up c Release button d Setting position for pivot pin e Scale 2 Pivot Pin XE6016-001 3 3 Attachment Screw XE6022-001 (2pcs. one is extra) 4 Template f Radius of circle in mm g Angular lines listed in degrees starting at 0 with 5 degree XE6024-001 intervals h Center Conversion Chart mm (f) inch 130 5 3/16 5 Instruction Manual 6 Braiding Foot 7 Cording Foot This Manual SA141/F021N SA110/F013N 120 4 3/4 Note 110 4 3/8 100 4 • We recommend that you use the extension table on your sewing machine for smooth fabric control. 90 3 1/2 80 3 3/16 • Do not raise the extension table when the circular devise is attached. • The pivot pin may be released if you hold up the 70 2 3/4 fabric while attached to the circular attachment. 60 2 3/8 When holding up the fabric gently press down on the top of the pivot pin. 50 2 • When sewing smaller circles or using fabric with a 40 3/2 grain or uneven textures, a perfect circle may not be 30 13/16 achieved. • Some of presser feet such as the side cutter cannot 6 7 be used with this attachment, always test your accessory feet with the attachment. • When using this attachment test the sewing speed of your machine for the best results. • When sewing larger pieces of fabric or garments, make sure that your fabric or garment does not get caught on the machine creating drag or distortion of your design.